Hdcp Input Enabled/Disabled [Hdcp Input Enable] - IDK MSD-5401 User Manual

8.5.2 HDCP input enabled/disabled [HDCP INPUT ENABLE]

Some source devices check whether the connected device supports HDCP and then determine whether they
encrypt HDCP signals or not. Since the MSD is HDCP compliant, if it is connected to a display device that is
not HDCP compliant, the display device may not display video.
With this menu, you can set whether the MSD encrypts HDCP to the source device. "ENABLE" is set by
default, but if you want to connect the MSD to a display device that is not HDCP compliant, select "DISABLE"
to disable the encryption of HDCP output from the source device.
･To disable HDCP encryption: DISABLE
･To enable HDCP encryption: ENABLE [Default]
HDCP output
ON
HDCP output
HDCP-compliant
OFF
PC
Note:
If you select "DISABLE" and connect a Blu-ray disc player or the like to the MSD, all video signals may not be
output. This is because Blu-ray disc players do not allow connection with any device that is not HDCP
compliant. In such a case, select "ENABLE" and connect an HDCP-compliant display device. Even if you
select "DISABLE" and video can be output, protected contents (movie, music video, and the like) still cannot
be played.
1. To enable/disable the HDCP input using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
INPUT SETTING
↓ SET key
[INPUT SETTING]
HDCP INPUT ENABLE
↓ SET key
[IN1 HDCP INPUT]
ENABLE
↓ ESC key: Returns to the previous screen.
DIGITAL DISPLAY MSD-5404
IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN9 OFF
MULTI POWER
SWITCHER
1 OUT1
COMMAND COMMAND COMMAND COMMAND COMMAND
2 OUT2 A B C D E
3 OUT3 MENU/SET
COMMAND
PRESET LOAD
4 OUT4 ESC
SWITCHING MODE
V&A VIDEO AUDIO
HDCP Setting =
"ENABLE"
DIGITAL DISPLAY MSD-5404
POWER IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN9 OFF
MULTI
SWITCHER
1 OUT1
COMMAND COMMAND COMMAND COMMAND COMMAND
B C D
2 OUT2 A E
3 OUT3 MENU/SET
COMMAND
PRESET LOAD
4 OUT4 SWITCHING MODE ESC
V&A VIDEO AUDIO
HDCP Setting =
"DISABLE"
[Figure 8.30] Enabling/disabling HDCP input
Top
▲▼keys: Select "INPUT SETTING".
▲▼keys: Select "HDCP INPUT ENABLE".
▲▼keys: select "DISABLE" or "ENABLE".
◄►keys: Select the desired input (IN1 to IN5).
HDCP-non-compliant display device
HDCP-compliant PC
HDCP-compliant/non-compliant PC
85
For each input
Video cannot be
displayed
Video can be
displayed
Only video without
copyright protection
can be displayed