Command Execution [Command Execution] - IDK MSD-5401 User Manual

[COMMAND A]
B- 1st:OFF
◄►keys
[COMMAND A]
B-10th:OFF
↓ SET key: Applies settings.
[COMMAND A]
NOW UPDATE...
↓
[COMMAND LINK]
COMMAND A
Note:
If you do not press the "SET" key, the command link is not changed. Make sure to press the "SET" key.
2. To associate the control command using commands:
@SCC: Set command link
@GCC: Get command link
@STG: Set toggle operation
@GTG: Get toggle operation
@SUP: Set execution plane at starting up
@GUP: Get execution plane at starting up

8.12.4 Command execution [COMMAND EXECUTION]

Although you can execute only COMMANDs A to E using the control command execution keys on the front
panel, you can execute all COMMANDs A to I using this menu. You can specify command numbers and
execute them without an association.
1. To execute control commands:
MSD-5404
↓ SET key
[FUNCTION SELECT]
PRESET COMMAND
↓ SET key
[PRESET COMMAND]
COMMAND EXECUTION
↓ SET key
[COMMAND EXECUTION]
COMMAND A
↓ SET key: Executes the command.
[COMMAND EXECUTION]
COMMAND A
↓ ESC key: Returns to the previous screen.
* Only executable commands are displayed.
▲▼keys: Set the PLANE B-1st command.
Settable only if you set "TOGGLE" to "ON".
▲▼keys: PLANE B-10
Settable only if you set "TOGGLE" to "ON".
The message is displayed for one second and then the previous
screen is displayed automatically.
Top
▲▼keys: Select "PRESET COMMAND".
▲▼keys: Select "COMMAND EXECUTION".
▲▼keys: Select the command you want to execute
(COMMAND A to I, COMMAND 1 to 32).
179
th
command
*