Input Automatic Sizing [Input Auto Sizing] - IDK MSD-5401 User Manual

8.3.9 Input automatic sizing [INPUT AUTO SIZING]

You can adjust input signals optimally (displaying input video on the full display device), and as a result the
following settings will be initialized automatically: "8.3.3 Aspect ratio control of input video", "8.3.5
Overscan", "8.3.6 Input position", "8.3.7 Input size", and "8.3.8 Input masking". It may not work if aspect
ratios of the input signal and display device do not match or depending on some settings.
1. To set the input automatic sizing using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
OUTPUT TIMING
↓ SET key
[OUTPUT TIMING]
INPUT AUTO SIZING
↓ SET key
[IN1 AUTO SIZING]
SURE? = NO
↓ To apply the setting: Select "YES" and press the "SET" key.
To return to the menu without any change: Select "NO" and press the "SET" key.
[OUTPUT TIMING]
INPUT AUTO SIZING
2. To set the input automatic sizing using commands:
@IAS: Input automatic sizing
Top
▲▼keys: Select "OUTPUT TIMING".
▲▼keys: Select "INPUT AUTO SIZING".
↑ ESC key: Returns to the previous screen without changing settings.
▲▼keys: Select "YES" or "NO".
▲▼keys: Select the desired input (IN1 toIN9).
For each input port/input signal
64
MSD-54 SERIES User's Guide