Sink Device Power Control; Command Control - IDK MSD-6203 User Manual

MSD-62 Series User's Guide
8.5

Sink device power control

You can register control commands to power the sink device on/off. By pressing the appropriate key, control
commands are sent to the sink device.
The DISPLAY POWER key illuminates when the sink device is powered on. The key does not illuminate when
the sink device is powered off.
The DISPLAY POWER key illuminates based on the sink device power status when reply command is sent
from the sink device.
Note:
If the reply command from the sink device is not checked, the actual power status of the sink device and the
LED may not match.
8.6

Command control

You can run commands that are linked to each control command execution key (COMMAND A to COMMAND
E).
No command is registered by default. Register commands and link them to control command execution keys.
40
【See: 9.14.3 Command link】
【See: 9.14.1 Registering/editing control command】
【See: 9.14.3 Command link】