8.7.12 HDCP re-authentication [HDCP AUTHORIZATION]
If a display device supporting HDCP is connected, HDCP is authorized automatically. You can re-authorize
HDCP manually using this menu. (Connection Reset is performed automatically, but it can be performed
manually using this menu.)
1. To perform the HDCP re-authentication using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
OUTPUT SETTING
↓ SET key
[OUTPUT SETTING]
HDCP AUTHORIZATION
↓ SET key
[OUT1 AUTHORIZATION]
SURE? = NO
↓ To execute re-authentication: Select "YES" and press the "SET" key.
To return to the menu without execution: Select "NO" and press the "SET" key.
[OUT1 AUTHORIZATION]
NOW UPDATE...
↓
[OUTPUT SETTING]
HDCP AUTHORIZATION
2. To perform the HDCP re-authentication using commands:
@HAU: Re-authorize HDCP
Top
▲▼keys: Select "OUTPUT SETTING".
▲▼keys: Select "HDCP AUTHENTICATION".
▲▼keys: Select "YES" or "NO".
◄►keys: Select the desired output (OUT1 to OUT4).
The message is displayed for one second and then previous screen is
displayed automatically.
121
For each output