Output Size [Output Size] - IDK MSD-5401 User Manual

8.3.11 Output size [OUTPUT SIZE]

Output video size is scalable in reference to the upper left of video set in "8.3.10 Output position".
You can set the size for each output by using this menu or for each input by using "8.3.7 Input size". Normally,
set position, size, and masking for each input in the settings of each input. If edges are cut off due to
enlargement display in the display device or if you want to enlarge output video of all channels at a time, set
the position for each output.
▪ Horizontal size: Scaled in a unit of pixel [Default]: Horizontal output resolution
▪ Vertical size: Scaled in a unit of line [Default]: Vertical output resolution
[Horizontal size]
The setting range and default vary depending on settings of "8.3.1 Output resolutions", and the range is
quarter to quadruple of output resolution. Default is the same as the resolution setting, and the video is
displayed on the full screen of the display device.
1. To set the output size (the number of pixels) using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
OUTPUT TIMING
↓ SET key
[OUTPUT TIMING]
OUTPUT SIZE
↓ SET key
[OUT1SIZ]H:1920/1920
LINK:ON V:1080/1080
↓◄►keys
[OUT1SIZ]H:1920/1920
LINK:ON V:1080/1080
↓◄►keys
[OUT1SIZ]H:1920/1920
LINK:OFF V:1080/1080
↓ ESC key: Returns to the previous screen.
[Vertical size]
[Figure 8.24] Output size
Top
▲▼keys: Select "OUTPUT TIMING".
▲▼keys: Select "OUTPUT SIZE".
▲▼keys: Set "LINK" to "OFF" or "ON" for H and V.
▲▼keys: Set horizontal display size of OUT1. Numbers following "/"
mean horizontal output resolution.
▲▼keys: Set vertical display size of OUT1. Numbers following "/"
mean vertical output resolution.
66
MSD-54 SERIES User's Guide
For each output
*1
*2