Command Execution Key: Lighting Condition [Command Tally] - IDK MSD-5401 User Manual

8.12.7 Command execution key: Lighting condition [COMMAND TALLY]

You can set the lighting condition of COMMANDs A to E on the front panel and COMMANDs A to I of Tally
output separately.
･Lights if a control command is registered: REGISTERED [Default]
･Lights while a control command is executed
*1
There are two planes (PLANE A and B) for each execution condition of COMMANDs A to I. If you register
control commands for both planes, the control commands are executed alternatively every time you press
the command key as follows.
[Table 8.22] Lighting conditions of control command execution keys
Lighting If you register a command only for
condition
Lights if a control command is
REGISTERED
registered
Lights while a control command is
EXECUTION
executed
*2
If execution time is 500 ms. or shorter, it lights for only 500 ms. It can be set to blinking in "8.12.8 Flash time
(Command keys and DISPLAY POWER keys)" that follows.
1. To set the lighting condition of command keys using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
PRESET COMMAND
↓ SET key
[PRESET COMMAND]
COMMAND TALLY
↓ SET key
[FRONT A]
REGISTERED
↓◄►keys
[FRONT A]
REGISTERED
↓◄►keys
[FRONT B]
REGISTERED
↓◄►keys
[TALLY I]
REGISTERED
↓ ESC key: Returns to the previous screen.
* If you set "LINK" to "ON", you can change all registered conditions at the same time.
one plane
Top
▲▼keys: Select "PRESET COMMAND".
▲▼keys: Select "COMMAND TALLY".
LINK:ON
▲▼keys: Select "OFF" or "ON" for "LINK".
▲▼keys: Select the lighting condition of COMMAND A on the front
LINK:ON
panel keys.
(REGISTERED, EXECUTION)
▲▼keys: Select the lighting condition of COMMAND B on the front
LINK:ON
panel keys.
(REGISTERED, EXECUTION)
▲▼keys: Select the lighting condition of COMMAND B on the front
LINK:ON
panel keys.
( REGISTERED, EXECUTION )
*1 *2
: EXECUTION
If you register commands for both two planes
Lights if PLANE A will be executed at the next
press; blinks if PLANE B will be executed at the
next press.
Lights if PLANE A will be executed at the next
press; turned off if PLANE B will be executed at
the next press.
183
*1
*