IDK MSD-5401 User Manual page 6

Do not place the product in any place where it will be subjected to high temperatures.
If the product is subjected to direct sunlight or high temperatures, it may cause fire.
Do not place the product in humid, oil smoke, or dusty place.
If the product is placed near humidifiers or dusty area, it may cause fire or electric shock.
Do not block the vent holes.
If ventilation slots are blocked, it may cause fire or failure due to internal heat.
Do not put heavy items on the product.
Prohibition
It may fall/turn over and lead to injury.
Do not exceed ratings of outlet and wiring devices.
If several plugs are put in an outlet, it may cause fire and electric shock.
Use only the provided AC adapter and power cable.
If non-compliant adapter or power cables is used, it may cause fire or electrical shock. Use the provided AC power
connection cable. If you want to use your product in other countries that use different AC power cables, contact IDK.
Do not plug or unplug with wet hands.
It may cause electrical shock.
No wet hands
Use and store the product within the specified temperature/humidity range.
If the product is used outside the range continuously, it may cause fire or electric shock.
Turn off devices when they are connected to another device.
Instruction
It may cause fire or electric shock.
Unplug the power plug if you do not use the product for a long period.
In case of defect, it may cause fire.
Unplug the power plug before cleaning.
Unplug
It may cause electric shock.
For installation
For rack mount devices:
Mount the product to the rack meeting EIA standards, and maintain spaces above and below
for air cooling. For your safety, attach an L-shape bracket in addition to the mount bracket kit
for the front panel in order to balance the weight.
Instruction
For devices with rubber feet:
Never insert only the screws into the holes after removing the rubber feet. It may lead to
damage when the screws contact electrical circuit or parts inside of the product.
To put the rubber feet back on, use only provided rubber feet and screws.
Instruction
Altitude:
Do not place the product at elevations of 2,000 meters (6562 feet) or higher above sea level.
Failure to do so may shorten the life of the internal parts and result in malfunctions.
Instruction
Caution
6
MSD-54 SERIES User's Guide