Aspect Ratio Control Of Input Video [Input Aspect] - IDK MSD-5401 User Manual

8.3.3 Aspect ratio control of input video [INPUT ASPECT]

･AUTO-1 [Default]
･AUTO-2
･4:3
･16:9
If you select "AUTO-1" or "AUTO-2", the aspect ratio will be restored automatically to the original ratio
according to the settings of "8.3.2 Aspect ratio control of output video" and "8.3.4 Aspect ratio ".
"AUTO-1" and "AUTO-2" work differently only when letter box signals are input. "AUTO-1" processes them as
video signals of 16:9 or 14:9 while "AUTO-2" sets them as 4:3. Normally, no problem occurs if you set the
aspect ratio to "AUTO-1", but some DVD players and other devices display subtitles or setup menus on the
area that does not have letter box signal video, which may not be displayed within the screen. In such case,
set the aspect to "AUTO-2" to display the whole video.
[Selecting "LETTER BOX/SIDE PANEL" for aspect ratio restoration processing]
Input signal
4:3 video signal
5:4 video signal
5:3 video signal BC: top&bottom BC: top&bottom
16:9 video signal BC: top&bottom
16:10 video signal BC: top&bottom BC: top&bottom
14:9 video signal BC: top&bottom
*The aspect ratio selected for the display device will be the base.
･14:9
･16:9 LETTER BOX
･14:9 LETTER BOX
･4:3 SIDE PANEL
Aspect ratio of connected display device*
4:3 5:4
BC: top&bottom
BC: right&left
BC: top&bottom
BC: top&bottom
[Figure 8.14] Aspect ratio control-1(1/2)
･14:9 SIDE PANEL
･FULL
･THROUGH
5:3 16:9
BC: right&left BC: right&left
BC: right&left BC: right&left
BC: right&left
BC: top&bottom
BC: right&left BC: right&left
BC: right&left BC: right&left
BC=Background color (Default: black)
52
MSD-54 SERIES User's Guide
For each input port/input signal
16:10
BC: right&left
BC: right&left
BC: top&bottom
BC: top&bottom
BC: right&left