Assigning Functions [Function Assign] - IDK MSD-5401 User Manual

8.14.1 Assigning functions [FUNCTION ASSIGN]

You can assign functions ([Table 8.27] to [Table 8.28]) to parallel input connectors.
1. To assign functions using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
PARALLEL
↓ SET key
[PARALLEL]
FUNCTION ASSIGN
↓ SET key
[PARALLEL PIN: 2]
OUT1-IN1
◄►keys
[PARALLEL PIN:49]
NOT USE
↓ SET key: Applies settings.
[PARALLEL FUNCTION]
NOW UPDATE...
↓
[PARALLEL]
FUNCTION ASSIGN
* You cannot assign functions to the following pins, and they are not displayed: Pins1, 25, 26, and 50.
Note:
If you do not press the "SET" key, the assignment is not changed. Make sure to press the "SET" key.
2. To assign functions using commands:
@SPE: Assigning function of parallel input
@GPE Get function assignment of parallel input
Top
▲▼keys: Select "PARALLEL".
▲▼keys: Select "FUNCTION ASSIGN".
↑ ESC key: Cancel settings and returns to the menu.
▲▼keys: Select the desired function for input pin 2.
▲▼keys: Select the desired function for input pin 49.
Displays the message for 1 second before automatically returning to
the previous screen.
195
*
*