Initializing Registered Commands And Associations [Initialize] - IDK MSD-5401 User Manual

8.12.6 Initializing registered commands and associations [INITIALIZE]

You can initialize the following commands and associations:
▪ Control commands registered in "8.12.1 Control commands"
▪ Reply commands registered in "8.12.2 Reply commands"
▪ Associations of control commands registered in "8.12.3 Command link"
Use this menu to delete or set them from the first step again.
1. To initialize commands using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
PRESET COMMAND
↓ SET key
[PRESET COMMAND]
INITIALIZE
↓ SET key
[PRESET INITIALIZE]
CMD 1
↓ SET key: Displays the confirmation screen.
[PRESET COMMAND1]
SURE? = NO
↓ SET key: Initializes setting.
[PRESET COMMAND 1]
NOW INITIALIZATION..
↓
[PRESET COMMAND]
INITIALIZE
Top
▲▼keys: Select "PRESET COMMAND".
▲▼keys: Select "INITIALIZE".
↑ ESC key: Cancels initializing and returns to the previous screen.
▲▼keys: Select the command or association you want to initialize.
(CMD1 to CMD 32, RCV 1 to RCV 32, or Association conditions
For control commands (CMD x) and reply commands (RCV x), MEMO
is displayed at the right side.
▲▼keys: Select "YES" or "NO".
Displays the message for 1 second before automatically returning to
the previous screen.
181
↑ ESC key
*
)