Speaker Configuration [Speaker] - IDK MSD-5401 User Manual

8.9.6 Speaker configuration [SPEAKER]

This menu is valid only all conditions below are met: if you select "INTERNAL EDID" for "8.9.1 EDID setting",
you select a resolution other than "UNUSED" for "8.9.3 Input resolution for AV devices [AV
RESOLUTION]", and you connect an HDMI device such as a Blu-ray recorder.
･The number of speakers: 1 to 8 [Default]: 2
If you select "AUTO" for the setting mode and set the number of speakers, the speaker configuration will be
set by default that is shown in the following table. To change the default configuration, set the mode to
"MANUAL" and set each speaker to ON/OFF individually.
The
number of FR/FL
speakers
1 OFF
2 ON
3 ON
4 ON
5 ON
6 ON
7 ON
8 ON
[Table 8.9] Default speaker configuration
LFE FC RL/RR
OFF ON OFF
OFF OFF OFF
ON OFF OFF
ON ON OFF
ON OFF ON
ON ON ON
ON ON ON
ON ON ON
FLH
FLW FL FLC
FRONT
REAR RL RLC
FL Front Left
FC Front Center
FR Front Right
FLC Front Left Center
FRC Front Right Center
RL Rear Left
RC Rear Center
RR Rear Right
RLC Rear Left Center
[Figure 8.45] Speaker configuration
FLC/ RLC/
RC
FRC RRC
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
ON OFF OFF
OFF OFF ON
FCH FRH
FC FRC FR
TC
RC RRC RR
RRC Rear Right Center
LFE Low Frequency Effect
FLW Front Left Wide
FRW Front Right Wide
FLH Front Left High
FCH Front Center High
FRH Front Right High
TC Top Center
142
MSD-54 SERIES User's Guide
For each input
FLW/ FLH/
TC
FRW FRH
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
FRW
LFE
FCH
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF