Table of Contents
Advertisement
8.13.3 Editing cross point [EDIT CROSS POINT]
Note:
Do not turn off the MSD while "NOW SAVING..." is displayed. Otherwise, setting data may be lost.
1. To edit the cross point using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
PRESET MEMORY
↓ SET key
[PRESET MEMORY]
EDIT CROSS POINT
↓ SET key
[EDIT CROSS POINT]
No.1
↓ SET key
[CROSS POINT 1]
OUT:1
V:--- A:---
↓◄►keys
[CROSS POINT 1]
OUT:1
V:--- A:---
↓◄►keys
[CROSS POINT 1]
OUT:1
V:--- A:---
↓◄►keys
[CROSS POINT 1]
NAME:
↓ SET key: Displays confirmation screen.
[CROSS POINT 1]
SAVE? = NO
↓ Select "YES" and press the "SET" key: Saves settings
Select "NO" and press the "SET" key: Not save settings and returns to the former display
[CROSS POINT 1]
NOW SAVING...
↓
[PRESET MEMORY]
EDIT CROSS POINT
* "---" is displayed for settings that do not control channels. Outputs that do not control channels when cross
point memory is loaded do not switch channels.
All cross point memories are set to not to control channel by factory default.
Top
▲▼keys: Select "PRESET MEMORY".
▲▼keys: Select "EDIT CROSS POINT".
▲▼keys: Select the desired memory number (1 to 9).
↑ ESC key: Cancels the setting and returns to the previous screen.
▲▼keys: Select output (OUT1 to OUT4).
▲▼keys: Select the desired video input channel (---, 1 to 9, or OFF).
▲▼keys: Select the desired audio input channel (---, 1 to 9, or OFF).*
▲▼keys: Set the memory name (20 to 7D of "9 ASCII codes").
◄►keys: Moves the cursor to the next character (Up to 10
characters).
▲▼keys: Select "Yes" or "No".
Displays the message for 1 second before automatically returning to
the previous screen.
↑ ESC key
188
MSD-54 SERIES User's Guide
*
Advertisement
Table of Contents
