Table of Contents
Advertisement
External
RS-232C
control
LAN
PARALLEL input
Tally output
External control
Others
Power supply
voltage
Power
consumption
Enclosure
dimensions
Product weight
Temperature
Humidity
Accessories
*1 30 bit/ pixel (10 bit/ component) Deep Color is supported.
xvYCC, Lip Sync, 3D, ARC, and HEC are not supported. (Lip Sync: manually adjustable)
*2 For MSD-5402SL, resolution cannot be set for each output separately. OUT1 and OUT2 are output always with the same resolution.
*3 Extended distance depends on the connected device. The data above is the maximum distance obtained when IDK's cable (AWG24)
was used and signals, 1080p 60Hz 24 bit/ pixel (8 bit/ component), were input and output. If you use other cables or for other
combinations of I/O devices, video signals may be unstable or may not be output even if it is within the distance range indicated
above.
*4 Seamless with a black frame or background color
*5 This function automatically recovers from a snow noise problem occurring when video signals having HDCP are displayed. It is
mainly for the time of start-up and does not work if the problem has already occurred in signals input to the MSD or due to a
low-grade transmission line.
*6 Connection reset function: Fixing problems automatically when a cable is repeatedly plugged in and out. This function may not be
enabled if another device is connected between the MSD and display device.
*7 Voltage resistance: Up to DC 48V / 50 mA for pins 2 to 21 and 27 to 46, DC 48V / 1A for pins 22 to 24 and 47 to 49. .
*8 Display device needs to support CEC. Some display device cannot be controlled by CEC from the MSD.
JBMIA: Japan Business Machine and Information System Industries Association.
2 ports, Male D-sub 9 pin connector
1 port, RJ-45 connector, 10Base-T/100Base-TX (Auto Negotiation), Auto MDI/MDI-X
1 port, Female 50 pin Amphenol, Non-voltage contact (make contact) input
Note: Functions of PARALLEL input connectors can be selected arbitrarily.
Female 50-pin Amphenol, Open collector outputs (*7)
Note: Functions of Tally output connectors can be selected arbitrarily.
Command output to RS-232C or LAN and contact control from Tally output for external devices
PJLink (class1) for projector control established by JBMIA
Power control of display devices using CEC (*8)
AC ~ 100 V - 240 V ±10%
0.6 A
16.93(W) x 3.46(H) x 13.78(D)"/430(W) x 88(H) x 350(D) mm
(EIA rack 2U, not including projections)
12.13 lbs./5.5 kg
Operating temperature: 32°F to 104 °F /0°C to + 40°C
Storage temperature: -4°F to 176°F/-20°C to + 80°C
Operating/Storage humidity: 20% to 90% (Non condensing)
One power cable (1.8 m/ 5.9 feet), one RS-232C cable (1.8 m/ 5.9 feet), one set of brackets for
mounting rack,
Cable clamps: x n
n: 6 for MSD-5401 and 5401SL, 7 for MSD-5402 and 5402SL, 8 for MSD-5403, 9 for MSD-5404
50 Hz/60 Hz ±3 Hz
260
MSD-54 SERIES User's Guide
Advertisement
Table of Contents
