Function Initialization [Initialize] - IDK MSD-5401 User Manual

8.14.10 Function initialization [INITIALIZE]

You can initialize functions of parallel input connector that are set in "8.14.1 Assigning functions".
･FACTORY DEFAULT: Functions of parallel input connectors will be restored to the factory default as
･ALL CLEAR: All functions of parallel input connectors will be set to "UNUSED".
･Tally->PARALLEL COPY: Functions of parallel input connectors will be the same as those of Tally
1. To initialize parallel input functions using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
PARALLEL
↓ SET key
[PARALLEL]
INITIALIZE
↓ SET key
[PARALLEL INIT]
FACTORY DEFAULT
↓ SET key: Displays the confirmation screen.
[FACTORY DEFAULT]
SURE? = NO
↓ To initialize the setting: Select "YES" and press the "SET" key.
return to the menu without any initialization: Select "NO" and press the "SET" key.
[FACTORY DEFAULT]
NOW INITIALIZATION..
↓
[PARALLEL]
INITIALIZE
2. To initialize parallel input functions using command:
@PDE: Initialize parallel input function assignment
shown in [Table 8.23] to [Table 8.26].
output connectors.
Top
▲▼keys: Select "PARALLEL".
▲▼keys: Select "INITIALIZE".
↑ ESC key: Cancels initialization and returns to the menu.
▲▼keys: Select the desired initialization mode
( FACTORY DEFAULT, ALL CLEAR, or Tally->PARALLEL COPY).
▲▼keys: Select "YES" or "NO".
Displays the message for 1 second before automatically returning to
the previous screen.
↑ ESC key
210
MSD-54 SERIES User's Guide
To