Table of Contents
Advertisement
9.13.4
Command execution
Menu
Top→PRESET COMMAND→COMMAND EXECUTION
Setting value CMD 1 to CMD 32,COMMAND A to COMMAND I
You can execute the registered control commands.
Only registered control command numbers are displayed as settable values. To execute the control command,
press the "MENU/SET" key.
9.13.5
Invalid duration at control command execution
Menu
Top→PRESET COMMAND→INVALID TIME
Setting value 0s000ms to 999s999ms [Default] 0s000ms
You can set the waiting time from starting control command execution to receiving the next command. Use
this menu to prevent repeated execution caused by pressing the control command execution key twice.
The longer time either of control command execution time or the time set in this menu will be applied as the
invalid operation time. Only operations from ports that execute control commands will be invalid; operations
from other ports can be performed. For example, if you execute a control command from the front panel, you
cannot perform all operations from the front panel until the control command execution time or time set in this
menu passes. However, even during invalid operation time, DISPLAY POWER and CHANNEL SELECT
commands for different outputs can be executed consecutively.
9.13.6
Initializing registered commands and link
Menu
Top→PRESET COMMAND→INITIALIZE
Setting value
CMD 1 to CMD 32: Control command
RCV 1 to RCV 32 : Reply command
POWER ON
You can initialize the following commands and associations:
▪
Control commands registered in "9.13.1 Registering/editing control command"
▪
Reply commands registered in "9.13.2 Registering / Editing reply command"
▪
Control command link "9.13.3 Command link"
Use this menu to delete or set them from the first step again.
A long buzzer will sound when the initialization is completed by pressing the MENU/SET key.
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
【See: 9.13.1 Registering/editing control command】
: Control command association
107
Advertisement
Table of Contents
