Control Commands - IDK MSD-804FD Series Command Manual

3.3.13 Control commands

@EXC Execute control commands
Command @EXC, command_1 (, command_2
format
Return value @EXC, command_1 (, command_2
format
Parameter command_1-5 : Control commands
Example Send
Receive
Send
Receive
Send
Receive
Send
Receive
Related info. 7.4 Executing Control Commands
8.12 Control Command Settings
Note As a result is replied after control command execution, it sometimes may take a long
time for the reply.
A to I, a to i = General commands (COMMANDs A to I)
1 to 32 = Control commands (COMMANDs 1 to 32)
@EXC,A
@EXC,A
@EXC,1,2,3
@EXC,1,2,3
@EXC,6
@EXC,6,RECV:
POWER OFF
@EXC,A
@ERR,10,A
MSD-804FD Users Guide (Command Guide)
･･･
)
･･･
)
Execute commands linked to COMMAND A.
Terminated normally.
Execute commands in order of COMMAND
1→2→3.
Terminated normally.
Execute COMMAND 6.
If you execute a command displaying received
data, the received result is replied. In this example,
"POWER OFF" is received from the device that
sent the command.
Execute command linked to COMMAND A.
If the command ends abnormally, the error status
and the executed control command are replied. (If
you execute several control commands, several
errors may be replied.)
88