Table of Contents
Advertisement
The error message below is displayed for a second when the VFD screen moves from the sub menu to the
setup menu in the following cases:
- "OUTn MONITOR" is set for any input channel, and
- no display device is connected, or
- loading EDID fails.
OUTPUT MONITOR
UNCONNECTED
If EDID cannot be updated pressing the "SET" key, the same message is displayed for a second as well.
If the error message is displayed, check the connection of the display device. If EDID can be loaded, EDID will
be updated automatically.
2. To set the EDID using commands:
@SED: Set EDID
@GED: Get EDID
OUTPUT MONITOR
EDID READ ERROR
135
Advertisement
Table of Contents
