Bitmap Output At Startup [Power On Bitmap] - IDK MSD-5401 User Manual

8.16.7 Bitmap output at startup [POWER ON BITMAP]

You can enable or disable bitmap output at the time of startup.
･OFF: Bitmap is not output. [Default]
･ON: Bitmap is output.
1. To enable or disable bitmap output using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
BITMAP
↓ SET key
[BITMAP]
POWER ON BITMAP
↓ SET key
[OUT1 POWER ON]
OFF
↓ ESC key: Returns to the previous screen.
*If several bitmaps are registered, select the bitmap number you want to output.
2. To enable or disable bitmap output using commands:
@SPB: Set startup bitmap
@GPB: Get startup bitmap
Top
▲▼keys: Select "BITMAP".
▲▼keys: Select "POWER ON BITMAP".
▲▼keys: Select "OFF" or "ON".
◄►keys: Select the desired output (OUT 1 to OUT 4).
231
For each output
*