Horizontal Start Position [H Start] - IDK MSD-5401 User Manual

8.6.2 Horizontal start position [H START]

･Starting position of horizontal reading:
64 to 2900 (Must be equal or less than [The total number of horizontal dots - Horizontal display
period])
[Default]: Depends on input signals
The settable range depends on settings of "8.6.1 The total number of horizontal dots" and "8.6.3
Horizontal display period". If the set value is [Total number of horizontal dots > Horizontal display period >
Horizontal start position] and the set value of the horizontal start position exceeds the limit value by changing
the total number of horizontal dots or horizontal display period, set the horizontal start position to the limit
value automatically.
1. To set the horizontal start position using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
INPUT TIMING
↓ SET key
[INPUT TIMING]
H START
↓ SET key
[IN6 H START]
296DOT
↓ ESC key: Returns to the previous screen.
Note:
You can set the horizontal start position only if there is an input signal. If no
signal is input, you cannot set the position, and the message shown right is
displayed.
2. To set the horizontal start position using commands:
@SHS: Set horizontal start position
@GHS: Get horizontal start position
Video signals
Horizontal
synchronizing signals
Horizontal start position = The number of dots from horizontal synchronous signal start to video signal start
[Figure 8.32] Horizontal start position
Top
▲▼keys: Select "INPUT TIMING".
▲▼keys: Select "H START".
▲▼keys: Set the horizontal start position.
◄►keys: Select the desired input (IN1 to IN9).
Total horizontal dots
Horizontal display
period
92
MSD-54 SERIES User's Guide
For each input port/input signal
[IN6 H START]
NOT AVAILABLE NOW