Output Level [Output Level] - IDK MSD-5401 User Manual

If bit stream signals (compressed audio) such as Dolby Digital are input to HDMI digital audio, these input
audio signals are output to digital audio as they are. They are not output to analog audio, and audio volume
cannot be adjusted.
Blu-ray disc player

8.8.1 Output level [OUTPUT LEVEL]

You can set the audio output level using audio output volume.
･Audio output level: -60 dB to +10 dB [Default]: ±0 dB
Note: If you change the output level while "8.8.2 Output mute" is set to "ON", mute is canceled.
If you set "8.18.6 Top VFD screen" to "AUDIO VOLUME", you can set the audio output level on the top
screen.
1. To set the audio output level using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
AUDIO
↓ SET key
[AUDIO]
OUTPUT LEVEL
↓ SET key
[OUT1 AUDIO VOLUME]
0dB
↓ ESC key: Returns to the previous screen.
2. To set the audio output level using commands:
@SSL: Set audio output level
@GSL: Get audio output level
@SOL: Set relative value of audio output level
@GOL: Get limit status of audio output level
Bit stream signals
Digital input
Adjusting audio volume disabled
[Figure 8.43] Inputting/Outputting bit stream signals
Top
▲▼keys: Select "AUDIO".
▲▼keys: Select "OUTPUT LEVEL".
▲▼keys: Set the audio output level (-60 to +10).
◄►keys: Select the desired output (OUT1 to OUT4).
Switch
Analog audio not output
123
Digital output
AV Amplifier
Analog output
Amplifier built in speaker
For each output