Table of Contents
Advertisement
8.18.4 DISPLAY POWER key pressing time length [POWER SWITCH ON]
You can set the pressing response time of the DISPLAY POWER keys to prevent the device from being
turned off when the switch is pressed accidentally:
0 ms. (starts the operation immediately after you press the power switch) to 5000 ms. (5 seconds);
by 10 ms. [Default]: 0 ms.
1. To set time for pressing power switch using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
OTHERS
↓ SET key
[OTHERS]
POWER SWITCH ON
↓ SET key
[FRONT POWER SW]
0ms
↓◄►keys
[PARALLEL POWER SW]
0ms
↓ ESC key: Returns to the previous screen.
2. To set time for pressing power switch using commands:
None
Top
▲▼keys: Select "OTHERS".
▲▼keys: Select "POWER SWITCH ON".
▲▼keys: Set the time length for the front panel (0 to 5000).
▲▼keys: Set the pressing time length for the parallel input (0 to 5000).
245
Advertisement
Table of Contents
