Table of Contents
Advertisement
4
5
6
Number
1
Input channel name
2
Output name
3
Control command name
4
SEND
5
RELOAD
6
END
For 1 to 3 above, only the first 10 one-byte characters are valid even if you enter 11 or more characters. (You
can use two-byte characters, but they are counted as two characters.)
1
2
3
[Figure 7.7] Window for editing names
Item
Enter the desired input names which will be displayed in
"CROSS POINT" on [Figure 7.6]. IN1 to 9 are set by factory
default.
Enter the desired output names which will be displayed in
"CROSS POINT" and "AUDIO VOLUME" on [Figure 6.7.a]
Web browser control window. OUT1 to 4 are set by default.
Enter the desired input names which will be displayed in
"COMMAND EXECUTE" on [Figure 7.6]. "A" to "I" are set by
default.
Saves the names entered above (1 to 3).
Restores to the current settings. Use this button to enter the
names again.
Finishes editing names. Click this button to open [Figure
7.7].
31
Description
Advertisement
Table of Contents
