Output Position [Output Position] - IDK MSD-5401 User Manual

8.3.10 Output position [OUTPUT POSITION]

You can set the display position of the output video by the pixel position of on the output screen.
You can set the position for each input channel in "8.3.6 Input position", in this menu you can set the position
for each output. Normally, set the position, size, and masking of each input in settings of each input. If edges
are cut off due to enlargement display in the display device or if you want to move output video for all
channels at a time, set the position for each output.
▪ Horizontal position: Changed in a unit of pixel [Default]: 0
▪ Vertical position: Changed in a unit of line [Default]: 0
[Horizontal position]
The setting range depends on settings of "8.3.1 Output resolution" and "8.3.11 Output size". Values can be
set unless video disappears from the top, bottom and right, left of the screen. If the display position exceeds
the settable range by changing display size, the display position will be set to the maximum value
automatically. Default is 0, and the video is displayed from the upper left of the display device.
1. To set the output position on the output screen (pixel position) using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
OUTPUT TIMING
↓ SET key
[OUTPUT TIMING]
OUTPUT POSITION
↓ SET key
[OUT1 POSITION]
H: 0 V:
↓◄►keys
[OUT1 POSITION]
H: 0 V:
↓ ESC key: Returns to the previous screen.
2. To set the output position on the output screen (pixel position) using commands:
@SOP: Set output position
@GOP: Get output position
[Figure 8.23] Output position
Top
▲▼keys: Select "OUTPUT TIMING".
▲▼keys: Select "OUTPUT POSITION".
▲▼keys: Set horizontal position of OUT1.
0
▲▼keys: Set vertical position of OUT1.
0
[Vertical position]
65
For each output