Table of Contents
Advertisement
8.6.10 Registering device data [SAVE]
You can register the set input timings of analog input as the device data.
From the next time, the convert operation will be performed with the registered timings when the same signal
is input from a different channel.
Note:
Do not turn off the MSD while "NOW SAVING..." is displayed in the MSD's VFD screen; otherwise, the set
data may be lost.
1. To register the device data using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
INPUT TIMING
↓ SET key
[INPUT TIMING]
SAVE
↓ SET key
[IN6 SAVE]
No.
1
↓ ◄►keys
[IN6 SAVE]
No. 1
↓ SET key: Displays the confirmation screen before saving settings
[TIMING TABLE 1]
SAVE? = NO
↓ To apply the setting: Select "YES" and press the "SET" key.
To return to the menu without any change: Select "NO" and press the "SET" key.
[TIMING TABLE 1]
NOW SAVING...
↓
[INPUT TIMING]
SAVE
Note:
Device data can be registered only if analog RGB or analog YPbPr signals are
input. You cannot register data and the message shown right is displayed in the
followings cases: analog video signals are input, no signal is input, or video input is set to a channel other
than IN6 to IN9.
IN 1
N/A
A: Can be registered only if analog RGB/analog YPbPr signals are input.
N/A: Cannot be registered.
2. To registering the device data using commands:
@STT: Register device data
Top
▲▼keys: Select "INPUT TIMING".
▲▼keys: Select "SAVE".
↑ ESC key: Returns to the previous screen without saving settings.
▲▼keys: Select the desired table number (1 to 99).
◄►keys: Moves the cursor to the device data name.
▲▼keys: Set the device data name (20 to 7D of "9 ASCII codes").
◄►keys: Moves the cursor to the next character.
▲▼keys: Select "YES" or "NO".
Displays the message for 1 second before automatically returning to
the previous screen.
IN 2
IN 3
IN 4
N/A
N/A
N/A
Select the desired input (IN6 to IN9).
IN 5
IN 6
IN 7
IN 8
N/A
A
A
105
For each input port/input signal
↑ ESC key
[IN6 SAVE]
NOT AVAILABLE NOW
IN 9
A
A
Advertisement
Table of Contents
