Table of Contents
Advertisement
MSD-72 Series User's Guide
VIDEO:OUT2-IN9,
VIDEO:OUT2-OFF
AUDIO:OUT2-IN1 to
AUDIO:OUT2-IN9,
AUDIO:OUT2-OFF
9.12.4 Command execution
Top → PRESET COMMAND → COMMAND EXECUTION
Menu
Setting value CMD 1 to CMD 32, COMMAND A to COMMAND I
You can execute the registered control commands (CMD 1 to CMD 32).
Only registered control command numbers are displayed as settable values. To execute the control command,
press the "MENU/SET" key.
9.12.5 Invalid time during control command execution
Top → PRESET COMMAND → INVALID TIME
Menu
Setting value 0s000ms to 999s999ms [Default]: 0s000ms
You can set the waiting time from starting control command execution to receiving the next command. Use
this menu to prevent repeated execution caused by pressing the control command execution key twice.
The longer time either of control command execution time or the time set in this menu will be applied as the
invalid operation time. Only operations from ports that execute control commands will be invalid; operations
from other ports can be performed. For example, if you execute a control command from the front panel, you
cannot perform all operations from the front panel until the control command execution time or time set in this
menu passes. However, even during invalid operation time, DISPLAY POWER and CHANNEL SELECT
commands for different outputs can be executed consecutively .
9.12.6 Initializing registered commands and associations
Top → PRESET COMMAND → INITIALIZE
Menu
Setting value
CMD 1 to CMD 32: Control command
RCV 1 to RCV 32: Reply command
COMMAND A to I: Control command association
POWER ON: Control command association
STANDBY: Control command association
DISPLAY1 POWER ON to DISPLAY4 POWER OFF: Control command association
VIDEO:OUT1-IN1 to VIDEO:OUT4-OFF: Control command association
AUDIO:OUT1-IN1 to AUDIO:OUT4-OFF: Control command association
You can initialize the following commands and associations:
▪ Control commands registered in "9.12.1 Registering/editing control command"
108
channel of OUT2
Selecting audio input
channel of OUT2
VIDEO:OUT4-IN9,
VIDEO:OUT4-OFF
AUDIO:OUT4-IN1 to
AUDIO:OUT4-IN9,
AUDIO:OUT4-OFF
【See: 9.12.1 Registering/editing control command】
channel of OUT4
Selecting audio input
channel of OUT4
Advertisement
Table of Contents
