Control Commands - IDK MSD-6203 Command Reference Manual

3.3.14 Control commands

@EXC
Setting Command
Response
Parameter
Setting Command
example Response
Description
Setting Command
example Response
Description
Remarks
@GDS / @SDS
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
Executing control commands
@EXC, command_1 (, command_2･･･)
@EXC, command_1 (, command_2･･･)
command_1-5: Control command
1 = COMMAND 1 to 32 = COMMAND 32
@EXC,1,2,3
@EXC,1,2,3
Executing COMMAND 1→2→3 in order.
@EXC,6
@EXC,6,RECV:POWER OFF
Executing COMMAND 6.
If a command to display received data is executed, the received result is
returned. In this example, "POWER OFF" is received from the target device.
Since the result is returned after control command execution is complete,
it sometimes may take a time for response.
Power button of sink device
@GDS
@GDS, onoff_1, onoff_2, onoff_3, ..., onoff_8
@SDS, ch_1, onoff_1 (, ch_2, onoff_2･･･)
@SDS, ch_1, onoff_1 (, ch_2, onoff_2･･･)
onoff_1-8: Power button of sink device
0 = OFF, 1 = ON
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
@GDS
@GDS,1,1,1,1,1,1,1,1
Getting the power button status of sink device.
OUT1 and OUT8 powered ON
@SDS,1,1
@SDS,1,1
Setting the power button of the sink device that is connected OUT1 to ON.
Since the result is returned after control command execution is complete,
it sometimes may take a time for response.
MSD-62 series Command Guide
85