Function Initialization [Initialize] - IDK MSD-5401 User Manual

8.15.2 Function initialization [INITIALIZE]

You can initialize functions of Tally output connector set in the menu of "8.15.1 Assigning functions".
･FACTORY DEFAULT: Functions of Tally output connectors will be restored to the factory default as
･ALL CLEAR: All functions of Tally output connectors will be set to "UNUSED".
･PARALLEL->Tally COPY: Settings of all the functions of Tally output connectors will be the same as
1. To initialize Tally output functions using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
TALLY
↓ SET key
[TALLY]
INITIALIZE
↓ SET key
[TALLY INITIALIZE]
FACTORY DEFAULT
↓ SET key: Displays the confirmation screen.
[FACTORY DEFAULT]
SURE? = NO
↓ To initialize the setting: Select "YES" and press the "SET" key.
return to the menu without any initialization: Select "NO" and press the "SET" key.
[FACTORY DEFAULT]
NOW INITIALIZATION..
↓
[TALLY]
INITIALIZE
2. To initialize Tally output functions using command:
@TDE: Initialize Tally output function assignments
shown in [Table 8.23] to [Table 8.26].
those settings already used for the parallel input connector.
Top
▲▼keys: Select "Tally".
▲▼keys: Select "INITIALIZE".
↑ ESC key: Cancels initialization and returns to the previous screen.
▲▼keys: Select the desired initialization mode (FACTORY DEFAULT,
ALL CLEAR, PARALLEL->Tally COPY).
▲▼keys: Select "YES" or "NO".
Displays the message for 1 second before automatically returning to
the previous screen.
↑ ESC key
221
To