IDK MSD-5401 User Manual page 233

1. To divide memory area using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
BITMAP
↓ SET key
[BITMAP]
DIVIDE MEMORY
↓ SET key
[DIVIDE MEMORY]
MODE:RESISE NUMBER:1
↓◄►keys
[DIVIDE MEMORY]
MODE:RESISE
↓◄►keys
[DIVIDE MEMORY]
DISPLAY:BLOCK
↓◄►keys
[BITMAP1 BLOCK]
0- 63(
↓◄►keys
[BITMAP2 BLOCK]
64-127(
↓ SET key: Displays the confirmation screen.
[DIVIDE MEMORY]
SURE? = NO
↓To execute divide: Select "YES" and press the "SET" key.
To return to the menu without divide: Select "NO" and press the "SET" key.
[DIVIDE MEMORY]
NOW UPDATE...
↓
[BITMAP]
DIVIDE MEMORY
* If you select "BLOCK" for "DISPLAY", the current start and end block positions are displayed on the left of
the VFD screen. If a bitmap is registered, the final block position is displayed in parentheses. The start and
end block positions after divide are displayed on the right. If you want to specify the after-divide size directly,
change the end block position.
If you select "BYTE", the currently reserved memory size is displayed on the left. If a bitmap is registered,
the number of bytes is displayed in parentheses. The memory size after divide is displayed on the right so
that you can specify directly the after-division memory size.
In case the registered bitmap will be deleted as a result of specifying the size directly, an "S" or "E" is
displayed in the upper right.
Top
▲▼keys: Select "BITMAP".
▲▼keys: Select "DIVIDE MEMORY".
▲▼keys: Select the desired divide mode (AUTO, RESIZE, DELETE).
▲▼keys: Set the number of divisions (1 to 4).
NUMBER:1
▲▼keys: Select the desired display mode (BLOCK, BYTE).
▲▼keys: Set the end block position of "BITMAP1" (0 to 127).
) 0- 63
▲▼keys: Set the end block position of "BITMAP2" (0 to 127).
) 64-127
▲▼keys: Select " YES" or "NO".
Displays the message for 1 second before automatically returning to
the previous screen.
↑ ESC key
233
*
*