Command Link [Command Link] - IDK MSD-5401 User Manual

8.12.3 Command link [COMMAND LINK]

The MSD has 98 command execution conditions as shown below. If these execution conditions are met,
control commands which are associated beforehand will be executed. One execution condition can be
associated to up to 10 commands. If several commands are associated, commands are executed in order of
registration. If the same command is associated several times, it is repeatedly executed.
Execution condition
COMMANDs A to I
POWER ON
DISPLAY1 POWER
ON
DISPLAY1 POWER
OFF
DISPLAY2 POWER
ON
DISPLAY2 POWER
OFF
DISPLAY3 POWER
ON
DISPLAY3 POWER
OFF
DISPLAY4 POWER
ON
DISPLAY4 POWER
OFF
VIDEO:OUT1-IN1
to
VIDEO:OUT1-IN9
VIDEO:OUT1-OFF
AUDIO:OUT1-IN1
to
AUDIO:OUT1-IN9
AUDIO:OUT1-OFF
Those functions can be controlled not only by pressing the front panel keys but also using parallel input or
communication commands.
For association, select control commands registered in "8.12.1 Control commands" (COMMAND 1 to 32). If
you do not want to execute any commands, select "OFF". All execution conditions are set to "OFF" by default.
[Table 8.20] Execution condition of control commands
Function
Control command
execution key
Controlling power
switch
Controlling display
device power of OUT1
Controlling display
device power of OUT2
Controlling display
device power of OUT3
Controlling display
device power of OUT4
Selecting video input
channel of OUT1
Selecting audio input
channel of OUT1
Execution condition
VIDEO:OUT2-IN1
to
VIDEO:OUT2-IN9
VIDEO:OUT2-OFF
AUDIO:OUT2-IN1
to
AUDIO:OUT2-IN9
AUDIO:OUT2-OFF
VIDEO:OUT3-IN1
to
VIDEO:OUT3-IN9
VIDEO:OUT3-OFF
AUDIO:OUT3-IN1
to
AUDIO:OUT3-IN9
AUDIO:OUT3-OFF
VIDEO:OUT4-IN1
to
VIDEO:OUT4-IN9
VIDEO:OUT4-OFF
AUDIO:OUT4-IN1
to
AUDIO:OUT4-IN9
AUDIO:OUT4-OFF
176
MSD-54 SERIES User's Guide
Function
Selecting video input
channel of OUT2
Selecting audio input
channel of OUT2
Selecting video input
channel of OUT3
Selecting audio input
channel of OUT3
Selecting video input
channel of OUT4
Selecting audio input
channel of OUT4