Table of Contents
Advertisement
8.5.5 Automatic detection of input video interruption [INPUT OFF CHECK]
The MSD can stop outputting video immediately after input video signals are disconnected for a moment.
Use this function to reduce distorted output video occurred at the time of switching if an external switcher is
connected for input of the MSD. The processing of this function is the same as that of switching input.
(Settings of the following menus are applied automatically: "8.7.5 Window transition effect", "8.7.6 ", and
"8.7.7 Wipe color".)
･ Not detect automatically: OFF
･ Detect automatically: ON [Default]
Note 1:
If you select "ON" and input video (VHS tapes or the like) that has a bad record condition, outputting video will
be ON/OFF repeatedly due to distorted synchronous idles. In this case, set this menu to "OFF".
Note 2:
Even if you set this item to "ON", distorted video cannot be corrected completely when input video signals are
lost. Especially if you set "8.7.5 Window transition effect" to an option other than "CUT", noises or black bars
may be output at the time of fading out or wiping out.
1. To enable/disable the automatic detection using menu:
MSD-5404
↓ SET key
[FUNCTION SELECT]
INPUT SETTING
↓ SET key
[INPUT SETTING]
INPUT OFF CHECK
↓ SET key
[IN1 OFF CHECK]
ON
↓ ESC key: Returns to the previous screen.
2. To enable/disable the automatic detection using commands:
@SID: Set automatic detection of input video interruption
@GID: Get automatic detection of input video interruption
Top
▲▼keys: Select "INPUT SETTING".
▲▼keys: Select "INPUT OFF CHECK".
▲▼keys: Select "ON" or "OFF".
◄►keys: Select the desired input (IN1 to IN9).
89
For each input
Advertisement
Table of Contents
