D-Link Dis-200G Series Cli Reference Manual page 102

20-4 show lldp neighbor interface
This command is used to display each physical interface's information currently learned from the
neighbor.
show lldp neighbors interface INTERFACE-ID [, | -] brief
Parameters
INTERFACE-ID
,
-
brief
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command display the information learned from the neighbor devices.
Example
This example shows how to display the neighbor information on Ethernet 1/0/1 to Ethernet 1/0/2 in brief mode.
Switch# show lldp neighbors interface Ethernet 1/0/1-2 brief
Port ID: eth1/0/1
------------------------------------------------------------
Remote Entities Count : 2
Entity 1
Chassis ID Subtype : MAC Address
Chassis ID : 00-01-02-03-04-01
Port ID Subtype : Local
Port ID : eth1/0/1
Port Description
Entity 2
Chassis ID Subtype : MAC Address
Chassis ID : 00-01-02-03-04-02
Port ID Subtype : Local
Port ID : eth1/0/1
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Specifies the interface ID.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No spaces before and after the
comma.
(Optional) Specifies a range of interfaces. No spaces before and
after the hyphen.
(Optional) Specifies to display the information in brief mode.
: RMON Port 1 on Unit 3
98