Page 1
DIS-700G-28SW Industrial Layer 2+ Gigabit Managed Switch with SFP slots Quick Installation Guide DIS-700G-28SW Industrial Layer 2+ Gigabit Managed Switch with SFP slots Quick Installation Guide This document outlines the quick installation of the DIS-700G-28SW series. Package Checklist Please verify that the box contains the following items:...
DIS-700G-28SW Industrial Layer 2+ Gigabit Managed Switch with SFP slots Quick Installation Guide Rack Mounting When mounting the switch, practice good safety habits. Relay rack mounting normally requires at least two people. 1. Obtain the tools required for the mounting hardware.
DIS-700G-28SW Industrial Layer 2+ Gigabit Managed Switch with SFP slots Quick Installation Guide Mounting Bracket Position 2 for Standard Mount Ground Connecting The switch must be properly grounded for optimum system performance. Alarm Relay Connecting The 30VDC/1A alarm relay output contacts are located in a 2P terminal block.
DIS-700G-28SW Industrial Layer 2+ Gigabit Managed Switch with SFP slots Quick Installation Guide Ethernet Interface Connecting (RJ45 Ethernet) The switch provides two types of electrical (RJ45) and optical (mini-GBIC) interfaces. Connecting the Ethernet interface via RJ45: To connect to a PC, use a straight-through or a cross-over Ethernet cable, ...
The RJ45 connector of the cable is connected to the CID port of DIS-700G-28SW; the DB9 connector of the cable is connected to the PC COM port. The pin assignment of the console cable is shown below: Connect &...
The Reset button is provided to reboot the system without the need to remove power. Under normal circumstances, you will not have to use it. However, or rare occasions, the DIS-700G-28SW may not respond; then you may need to push the Reset button.
DIS-700G-28SW Industrial Layer 2+ Gigabit Managed Switch with SFP slots Quick Installation Guide LED STATUS INDICATIONS LED Name Indicator /color Condition 1. System Status Indicators On Green System is working normal Flash Green System booting, or database saving or remote download is...
Page 10
DIS-700G-28SW Industrial Layer 2+ Gigabit Managed Switch with SFP slots Quick Installation Guide Federal Communication Commission Interference Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.