Appendix B - Trap Entries - D-Link Dis-200G Series Cli Reference Manual

Appendix B - Trap Entries

The following table lists all possible trap log entries and their corresponding meanings that will appear in the
switch.
Authentication Fail
Trap Name
authenticationFailure
DDM
Trap Name
dDdmAlarmTrap
dDdmWarningTrap
LBD
Trap Name
isLbdLoopOccurred
isLbdLoopRestart
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Description
An authenticationFailure trap signifies that the SNMPv2
entity, acting in an agent role, has received a protocol
message that is not properly authenticated. While all
implementations of the SNMPv2 must be capable of
generating this trap, the snmpEnableAuthenTraps
object indicates whether this trap will be generated.
Description
A notification is generated when an abnormal alarm
situation occurs or recovers from an abnormal alarm
situation to normal status. Only when the current value>
low warning or current value <high warning will send
recover trap.
Binding objects:
(1) dDdmNotifyInfoIfIndex
(2) dDdmNotifyInfoComponent
(3) dDdmNotifyInfoAbnormalLevel
(4) dDdmNotifyInfoThresholdExceedOrRecover
A notification is generated when an abnormal warning
situation occurs, or recovers from an abnormal warning
situation to normal status.
Binding objects:
(1) dDdmNotifyInfoIfIndex
(2) dDdmNotifyInfoComponent
(3) dDdmNotifyInfoAbnormalLevel
(4) dDdmNotifyInfoThresholdExceedOrRecover
Description
his trap is sent when an interface loop occurs.
Binding objects:
(1) isLbdNotifyInfoIfIndex
This trap is sent when an interface loop restarts after the
interval time.
Binding objects:
(1) isLbdNotifyInfoIfIndex
261
OID
1.3.6.1.6.3.1.1.5
.5
OID
1.3.6.1.4.1.171.
11.155.1000.72.
0.1
1.3.6.1.4.1.171.
11.155.1000.72.
0.2
OID
1.3.6.1.4.1.171.
11.155.1000.46.
0.1
1.3.6.1.4.1.171.
11.155.1000.46.
0.2