D-Link Dis-200G Series Cli Reference Manual page 72

Switch#
13-9 show multicast filtering-mode
This command is used to enable and configure the DoS prevention mechanism. Use the no form of this
command to reset DoS prevention to the default setting.
show multicast filtering-mode
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
None.
Example
This example shows how to display the multicast filtering mode
Switch#show multicast filtering-mode
IP Multicast Filtering Mode : forward-unregistered
Switch#
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
68