D-Link Dis-200G Series Cli Reference Manual page 121

This example shows how to display MSTP summary information.
Switch# show spanning-tree mst
Spanning tree: Disabled, protocol: RSTP
BPDU Forward : Disabled
Number of MST instances: 1
>>>>MST00 vlans mapped : 1-4094
Bridge Address: 00-01-02-03-04-00, Priority: 32768 (32768 sysid 0)
Designated Root Address: 00-00-00-00-00-00, Priority: 0 (0 sysid 0)
Regional Root Bridge Address: 00-00-00-00-00-00, Priority: 0 (0 sysid 0)
Designated Bridge Address: 00-00-00-00-00-00, Priority: 0 (0 sysid 0)
Topology Changes Count: 0
Interface
-------------- ----
eth1/0/1
Switch#
This example shows how to display MSTP instance mapping configuration.
Switch# show spanning-tree mst configuration
Name
Revision : 2, Instances configured : 3
Instance
--------
0
1
2
Switch#
24-5 spanning-tree mst configuration
This command is used to enter the MST Configuration Mode. Use the no form of this command to revert to the
default setting.
spanning-tree mst configuration
no spanning-tree mst configuration
Parameters
None.
Default
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Role State
-----
nonStp forwarding 200000
: MName
Vlans
-------------------------------------------------------------
21-4094
1-10
11-20
Cost Priority Edge
---- -------- ----
128
117
non-edge