D-Link Dis-200G Series Cli Reference Manual page 51

None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
This command is used to create, modify or delete an ITU-T G.8032 ERP physical ring and enter the ERP
configuration mode.
Example
This example shows how to create an ERP ring named "campus".
Switch# configure terminal
Switch(config)# ethernet ring g8032 campus
Switch(config-erp)#
11-3 ethernet ring g8032 profile
This command is used to create or modify a G.8032 profile and enter the ERP profile configuration mode. Use
the no form of this command to delete the specified profile.
ethernet ring g8032 profile PROFILE-NAME
no ethernet ring g8032 profile PROFILE-NAME
Parameters
PROFILE-NAME
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
This command is used to create, modify or delete a G.8032 profile and enter the ERP profile configuration
mode.
Example
This example shows how to create a G.8032 profile named "campus".
Switch# configure terminal
Switch(config)# ethernet ring g8032 profile campus
Switch(config-g8032-ring-profile)#
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Specifies the name of the G.8032 profile with the maximum of 32
characters.
47