D-Link Dis-200G Series Cli Reference Manual page 197

MAC-ADDRESS
MASK
component-type
vms
vms-client
video-encoder
network-storage
other
description TEXT
Default
OUI Address
28-10-7B-00-00-00
28-10-7B-20-00-00
B0-C5-54-00-00-00
F0-7D-68-00-00-00
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to add user-defined OUI(s) for the surveillance VLAN. The OUI for surveillance VLAN are
used to identify the surveillance traffic by the surveillance VLAN function.
If the source MAC addresses of the received packet matches any of the OUI pattern, the received packet is
determined as a surveillance packet.
The user-defined OUI cannot be the same as the default OUI.
The default OUI cannot be deleted.
Example
This example shows how to add a user-defined OUI for surveillance devices.
Switch# config terminal
Switch(config)# surveillance vlan mac-address 00-01-02-03-00-00 FF-FF-FF-FF-00-00
component-type vms description user1
Switch(config)#
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Specifies the OUI MAC address.
Specifies the OUI MAC address matching bitmask.
(Optional) Specifies surveillance components that could be auto-
detected by surveillance VLAN.
(Optional) Specifies the surveillance components type as Video
Management Server (VMS).
(Optional) Specifies the surveillance components type as VMS
client.
(Optional) Specifies the surveillance components type as Video
Encoder.
(Optional) Specifies the surveillance components type as Network
Storage.
(Optional) Specifies the surveillance components type as other IP
Surveillance Devices.
(Optional) Specifies the description for the user-defined OUI with a
maximum of 32 characters.
Mask
FF-FF-FF-E0-00-00
FF-FF-FF-F0-00-00
FF-FF-FF-80-00-00
FF-FF-FF-F0-00-00
Component Type
D-Link Device
D-Link Device
D-Link Device
D-Link Device
193
Description
IP Surveillance Device
IP Surveillance Device
IP Surveillance Device
IP Surveillance Device