D-Link Dis-200G Series Cli Reference Manual page 255

This example shows how to modify two lines of the copyright information at the bottom of the authentication
page with:
Line 1: Copyright @ 2018 All Rights Reserved
Line 2: Site: http://support.website.com
Switch# configure terminal
Switch(config)# web-auth page-element copyright-line 1 title Copyright @ 2018 All
Rights Reserved
Switch(config)# web-auth page-element copyright-line 2 title Site:
http://support.website.com
Switch(config)#
45-3 web-auth success redirect-path
This command is used to configure the default URL the client Web browser will be redirected to after
successful authentication. Use the no form of this command to remove the specification.
web-auth success redirect-path STRING
no web-auth success redirect-path
Parameters
STRING
Default
By default, the Web authentication logout page is displayed.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to specify the Web page to display to the hosts who passes the Web authentication.
Example
This example shows how to configure the default redirect path to be "http://www.website.com" after passing
Web authentication.
Switch# configure terminal
Switch(config)# web-auth success redirect-path http://www.website.com
Switch(config)#
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Specifies the default URL the client Web browser will be redirected
to after successful authentication. If no default redirect URL is
specified, the Web authentication logout page will be displayed.
The default redirect path can be up to 128 characters.
251