1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Switch
  5. Dis-200G Series
  6. Web ui reference manual

D-Link Dis-200G Series Web Ui Reference Manual

Industrial gigabit ethernet switch.
Hide thumbs Also See for Dis-200G Series:
Table of Contents

Advertisement

Quick Links

See also: Cli Reference Manual
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch

Advertisement

Table of Contents
loading

Related Manuals for D-Link Dis-200G Series

Summary of Contents for D-Link Dis-200G Series

  • Page 1 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch...
  • Page 2 Information in this document is subject to change without notice. Reproduction of this document in any manner, without the written permission of the D-Link Corporation, is strictly forbidden. Trademarks used in this text: D-Link and the D-Link logo are trademarks of the D-Link Corporation; Microsoft and Windows are registered trademarks of the Microsoft Corporation.

  • Page 3: Table Of Contents

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Table of Contents INTRODUCTION ................................. 1 ......................................1 UDIENCE ..................................1 THER OCUMENTATION ....................................... 1 ONVENTIONS ................................2 OTES OTICES AUTIONS WEB-BASED SWITCH CONFIGURATION ..........................3 ..................................3 ANAGEMENT PTIONS ............................3...
  • Page 4 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch IPv6 Interface ....................................21 ..................................21 ONFIGURATION Port Settings ....................................21 Jumbo Frame ....................................23 E(DIS-200G-12PS DIS-200G-12PSW O ) ..........................24 PoE System ....................................24 PoE Status ....................................25 PoE Configuration ..................................25 PD Alive ......................................
  • Page 5 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch MAC Address Table Settings ................................ 48 MAC Address Table ..................................49 VLAN ........................................ 50 VLAN Configuration Wizard ................................. 50 802.1Q VLAN ....................................52 Management VLAN ..................................52 GVRP ......................................53 Asymmetric VLAN ..................................56 VLAN Interface .....................................
  • Page 6 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch RADIUS Global Settings ................................93 RADIUS Server Settings ................................93 RADIUS Statistic ................................... 94 ....................................92 AFEGUARD NGINE Safeguard Engine Settings ................................92 ................................93 RAFFIC EGMENTATION ETTINGS ....................................93 TORM ONTROL ................................
  • Page 7 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Group Details ..................................... 119 IP-C ................................... 120 AMERA NFORMATION NVR I .................................... 121 NFORMATION ..................................... 122 NFORMATION ....................................123 CHEDULING ........................................ 125 Clock Settings ..................................... 125 SNTP Settings ..................................... 125 ..................................126...

  • Page 8: Introduction

    Web User Interface (Web UI). The Web UI is the secondary management interface to the DIS-200G Series switch, which will be generally be referred to simply as “the Switch” within this manual. This manual is written in a way that assumes that you already have the experience and knowledge of Ethernet and modern networking principles for Local Area Networks.

  • Page 9: Notes, Notices, And Cautions

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Notes, Notices, and Cautions Below are examples of the three types of indicators used in this manual. When administering your switch using the information in this document, you should pay special attention to these indicators. Each example below provides an explanatory remark regarding each type of indicator.

  • Page 10: Web-Based Switch Configuration

    Web browser, such as Microsoft® Internet Explorer, Mozilla Firefox, Safari, or Google Chrome. Connecting using the Web User Interface Most software functions of the DIS-200G Series switches can be managed, configured and monitored via the embedded web-based (HTML) interface. Manage the Switch from remote stations anywhere on the network through a standard web browser.
  • Page 11 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Figure 2-1 Displays entering the IP address in Internet Explorer This will open the user authentication window, as seen below. Figure 2-2 User Authentication window Enter the User Name and Password in the corresponding fields and click Login. The default username is admin and the default password is admin.

  • Page 12: Smart Wizard

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Smart Wizard After a successfully connecting to the Web User Interface for the first time, the Smart Wizard embedded Web utility will be launched. This wizard will guide the user through basic configuration steps that is essential for first time connection to the Switch.
  • Page 13 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Step 2 – System IP Information In this window, the user can configure the IP address assignment method, the static IP address, Netmask and Gateway address. NOTE: The Switch will probe for surveillance devices every 30 seconds. If a surveillance device is not in the same subnet as the switch, it will not be discovered automatically.
  • Page 14 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Step 3 – User Accounts Settings In this window, the user can configure the user password of ‘admin’ account. Figure 2-5 Password window The fields that can be configured are described below:...
  • Page 15 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Step 4 – SNMP Settings In this window, the user can enable or disable the SNMP function. Figure 2-7 SNMP window Figure 2-6 SNMP window The fields that can be configured are described below:...

  • Page 16: Web User Interface (Web Ui)

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Web User Interface (Web UI) By clicking the Exit button in the Smart Wizard, you will enter the Web-based Management interface. Areas of the User Interface The figure below shows the Web UI in the Standard Mode. Three distinct areas that divide the user interface, as described in the table.

  • Page 17: Surveillance Mode

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Surveillance Mode After accessing the Web UI in the Surveillance Mode,the following will be displayed:. Figure 2-8 Web UI (Surveillance Mode) The following Areas can be observed in the above window: Parameter...

  • Page 18: Save And Tools

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Save and Tools Save Configuration Firmware Information Firmware Upgrade & Backup Configuration Restore & Backup Log Backup Ping Reset Reboot System Save Configuration This window is used to save the running configuration to the start-up configuration or the file system of the Switch.

  • Page 19: Firmware Upgrade & Backup

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Firmware Upgrade & Backup Firmware Upgrade from HTTP This window is used to initiate a firmware upgrade from a local PC using HTTP. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from...

  • Page 20: Firmware Backup To Http

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Firmware Backup to HTTP This window is used to initiate a firmware backup to a local PC using HTTP. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to...

  • Page 21: Configuration Restore & Backup

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Configuration Restore & Backup Configuration Restore from HTTP This window is used to initiate a configuration restore from a local PC using HTTP. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore...

  • Page 22: Configuration Backup To Http

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Take effect after the next boot Specify this radio button to restore and overwrite the start-up (startup-config) configuration file on the Switch. Click the Restore button to initiate the configuration restore. Configuration Backup to HTTP This window is used to initiate a configuration file backup to a local PC using HTTP.

  • Page 23: Log Backup

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Log Backup Log Backup to HTTP This window is used to initiate a system log backup to a local PC using HTTP. To view the following window, click Tools > Log Backup > Log Backup to HTTP, as shown below: Figure 3-11 Log Backup to HTTP window Click the Backup button to initiate the system log backup.

  • Page 24: Ping

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Ping Ping is a small program that sends ICMP Echo packets to the IP address you specify. The destination node then responds to or “echoes” the packets sent from the Switch. This is very useful to verify connectivity between the Switch and other nodes on the network.

  • Page 25: Reset

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Reset This window is used to reset the Switch’s configuration to the factory default settings. To view the following window, click Tools > Reset, as shown below: Figure 3-15 Reset window Select the The Switch will be reset to its factory defaults including IP address, and then will save, reboot option to reset the Switch’s configuration to its factory default settings.

  • Page 26: System

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch System Device Information System Information Settings Port Configuration System Log Time Time Profile Device Information In this window, the Device Information, CPU, and Used status are displayed. It appears automatically when you log in the Switch. To return to the Device Information window after viewing other windows, click the DIS-200G-12PS/12PSW link.

  • Page 27: Ipv4 Interface

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch IPv4 Interface This window is used to view and configure the IPv4 interface settings. To view the following window, click System > System Information Settings > IPv4 Interface, as shown below: Figure 4-3 IPv4 Interface window...

  • Page 28: Ipv6 Interface

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch IPv6 Interface This window is used to view and configure the IPv6 interface settings. To view the following window, click System > System Information Settings > IPv6 Interface, as shown below: Figure 4-4 IPv6 Interface window...
  • Page 29 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Parameter Description From Port / To Port Select the appropriate port range used for the configuration here. State Select this option to enable or disable the physical port here. MDIX Select the Medium Dependent Interface Crossover (MDIX) option here.

  • Page 30: Jumbo Frame

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Jumbo Frame This window is used to view and configure the Jumbo Frame size and settings. The Switch supports jumbo frames. Jumbo frames are Ethernet frames with more than 1,518 bytes of payload. The Switch supports jumbo frames with a maximum frame size of up to 9600 bytes.

  • Page 31: Poe(Dis-200G-12Ps And Dis-200G-12Psw Only)

    This switch support Power over Ethernet (PoE) as defined by the IEEE 802.3af and 802.3at. All ports can support PoE up to 30W. The Switch follows the standard PSE (Power Sourcing Equipment) pin-out Alternative A, whereby power is sent out over pins 1, 2, 3 and 6. The Switches work with all D-Link 802.3af capable devices.

  • Page 32: Poe Status

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch PoE Status This window is used to configure the description, and display the PoE status of each port. To view the following window, click System > PoE > PoE Status, as shown below:...

  • Page 33: Pd Alive

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Time Profile Select the name of the time range to determine the activation period. Click the Delete Time Profile button to clear the setting in the corresponding Time Range field. Click the Apply button to accept the changes made.

  • Page 34: System Log

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch System Log System Log Settings This window is used to view and configure the system’s log settings. To view the following window, click System > System Log > System Log Settings, as shown below:...

  • Page 35: System Log

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Severity Select the severity value of the type of information that will be logged. Options to choose from are Errors, Warning, Notice and Informational. Facility Select the facility value here. Options to choose from are 0 to 7.

  • Page 36: Time Zone Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Time Zone Settings This window is used to configure time zones and Daylight Savings Time settings for SNTP. To view the following window, click System > Time > Time Zone Settings, as shown below:...

  • Page 37: Sntp Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch From: Day of the Week Select the day of the week that summer time will start. From: Month Select the month that summer time will start. From: Time (HH:MM) Select the time of the day that summer time will start.

  • Page 38: Time Profile

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Poll Interval Enter the synchronizing interval in seconds. The value is from 30 to 99999 seconds. The default interval is 720 seconds. Click the Apply button to accept the changes made. The fields that can be configured for SNTP Server Setting are described below:...

  • Page 39: Management

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Management User Account Settings Password Encryption SNMP RMON HTTP/HTTPS D-Link Discovery Protocol User Account Settings This window is used to create and configure the user accounts. The active user account sessions can be viewed.

  • Page 40: Password Encryption

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Password Encryption This window is used to configure the encryption of the password before stored in the configuration file. To view the following window, click Management > Password Encryption, as shown below:...

  • Page 41: Snmp

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch SNMP Simple Network Management Protocol (SNMP) is an OSI Layer 7 (Application Layer) designed specifically for managing and monitoring network devices. SNMP enables network management stations to read and modify the settings of gateways, routers, switches, and other network devices. Use SNMP to configure system features for proper operation, monitor performance and detect potential problems in the Switch, switch group or network.

  • Page 42: Snmp Global Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The Switch incorporates a flexible SNMP management for the switching environment. SNMP management can be customized to suit the needs of the networks and the preferences of the network administrator. Use the SNMP V3 menus to select the SNMP version used for specific tasks.

  • Page 43: Snmp View Table Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Coldstart Tick this option to control the sending of SNMP coldStart notifications. Warmstart Tick this option to control the sending of SNMP warmStart notifications. Click the Apply button to accept the changes made.

  • Page 44: Snmp Community Table Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch SNMP Community Table Settings This window is used to create an SNMP community string to define the relationship between the SNMP manager and an agent. The community string acts like a password to permit access to the agent on the Switch.

  • Page 45: Snmp Group Table Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch SNMP Group Table Settings An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the previous window. To view the following window, click Management > SNMP > SNMP Group Table Settings, as shown...

  • Page 46: Snmp Engine Id Local Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Read View Name Enter the read view name that the group user can access. Write View Name Enter the write view name that the group user can access. Notify View Name Enter a write view name that the group user can access. The notify view describes the object that can be reported its status via trap packets to the group user.

  • Page 47: Snmp Host Table Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Parameter Description User Name Enter an alphanumeric string of up to 32 characters. This is used to identify the SNMP users. Group Name Enter the SNMP group name to which the user belongs. The syntax is general string that does not allow spaces.
  • Page 48 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured are described below: Parameter Description Host IPv4 Address Enter the IPv4 address of the SNMP notification host. SNMP Version Select the security model here. Options to choose from are SNMPv1, SNMPv2c, and SNMPv3.

  • Page 49: Rmon

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch RMON RMON Global Settings This window is used to enable or disable remote monitoring (RMON) for the rising and falling alarm trap feature for the SNMP function on the Switch. To view the following window, click Management > RMON > RMON Global Settings, as shown below:...

  • Page 50: Rmon History Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch After clicking the Show Detail button, the following window will appear. Figure 5-12 RMON Statistics Table window Click the Back button to return to the previous window. RMON History Settings This window is used to configure and display RMON MIB history statistics gathering on the specified port.

  • Page 51: Rmon Alarm Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Figure 5-14 RMON History Table window Click the Back button to return to the previous window. RMON Alarm Settings This window is used to configure and display alarm entries to monitor an interface.

  • Page 52: Rmon Event Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch RMON Event Settings This window is used to configure and display event entries. To view the following window, click Management > RMON > RMON Event Settings, as shown below: Figure 5-16 RMON Event Settings...

  • Page 53: Http/Https

    D-Link Discovery Protocol This window is used to configure and display D-Link Discovery Protocol (DDP). To view the following window, click Management > D-Link Discovery Protocol, as shown below: Figure 5-19 D-Link Discovery Protocol window The fields that can be configured for D-Link Discovery Protocol are described below:...

  • Page 54: Layer 2 Features

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Layer 2 Features VLAN Spanning Tree Loopback Detection Link Aggregation L2 Multicast Control LLDP Static FDB Unicast Static FDB This window is used to view and configure the static unicast forwarding settings on the Switch.

  • Page 55: Mac Address Table Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Multicast Static FDB This window is used to view and configure the multicast static FDB settings. To view the following window, click L2 Features > FDB > Static FDB > Multicast Static FDB, as shown...

  • Page 56: Mac Address Table

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Figure 6-4 MAC Address Table Settings (MAC Address Learning) window The fields that can be configured are described below: Parameter Description From Port / To Port Select the range of ports that will be used for this configuration here.

  • Page 57: Vlan

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch VLAN VLAN Configuration Wizard This window is used to guide the user to create a new VLAN or configure an existing VLAN on the Switch. Step 1 – Select VLAN To view the following window, click L2 Features > VLAN > VLAN Configuration Wizard, as shown...
  • Page 58 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Figure 6-8 VLAN Configuration Wizard (Configure VLAN) Window The fields that can be configured are described below: Parameter Description VLAN Name Enter the name of the VLAN. Tagged Click to designate the post as tagged. Click the All button to select all ports.

  • Page 59: 802.1Q Vlan

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch 802.1Q VLAN This window is used to view and configure the VLAN settings on this switch. To view the following window, click L2 Features > VLAN > 802.1Q VLAN, as shown below: Figure 6-10 802.1Q VLAN window...

  • Page 60: Gvrp

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch GVRP GVRP Global This window is used to view and configure the GARP VLAN Registration Protocol (GVRP) global settings. To view the following window, click L2 Features > VLAN > GVRP > GVRP Global, as shown below:...
  • Page 61 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Figure 6-13 GVRP Port window Guide The fields that can be configured are described below: Parameter Description From Port / To Port Select the appropriate port range used for the configuration here.
  • Page 62 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch used. Advertise VID List Enter the advertised VLAN ID list here. Click the Apply button to accept the changes made. GVRP Forbidden VLAN This window is used to view and configure the GVRP forbidden VLAN settings.

  • Page 63: Asymmetric Vlan

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Asymmetric VLAN This window is used to configure the asymmetric VLAN function. To view the following window, click L2 Features > VLAN > Asymmetric VLAN, as shown below: Figure 6-16 Asymmetric VLAN window...
  • Page 64 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch More detailed information about the VLAN of the specific interface is displayed. Click the Back button to return to the previous window. After click the Edit button, the following window will appear. This is a dynamic window that will change when a different VLAN Mode was selected.
  • Page 65 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured are described below: Parameter Description VLAN Mode Select the VLAN mode option here. Options to choose from are Access, Hybrid, and Trunk. Acceptable Frame Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All.
  • Page 66 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch value must be between 1 and 4094. Action Select the action that will be taken here. Options to choose from All, Add, Remove, and Except. Allowed VLAN Range Enter the allowed VLAN range information here.

  • Page 67: Auto Surveillance Vlan

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Auto Surveillance VLAN Auto Surveillance Properties This window is used to configure the auto surveillance VLAN global settings and display the ports surveillance VLAN information. To view the following window, click L2 Features > VLAN > Auto Surveillance VLAN > Auto...
  • Page 68 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Log State Set the Surveillance VLAN log state Click the Apply button to accept the changes made. The fields that can be configured for Port Settings are described below: Parameter Description From Port / To Port Select the appropriate port range used for the configuration here.
  • Page 69 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch ONVIF IP-Camera Information This window is used to display ONVIF IP camera information. Figure 6-24 Auto Surveillance VLAN Summary window To view the following window, click L2 Features > VLAN > Auto Surveillance VLAN > ONVIF IP-...
  • Page 70 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Click the Back button to discard the changes made and return to the previous window. Click the Apply button to accept the changes made. ONVIF NVR Information This window is used to display ONVIF Network Video Recorder (NVR) information.

  • Page 71: Voice Vlan

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Voice VLAN Voice VLAN Global Voice VLAN is a VLAN used to carry voice traffic from IP phone. Because the sound quality of an IP phone call will be deteriorated if the data is unevenly sent, the quality of service (QoS) for voice traffic shall be configured to ensure the transmission priority of voice packet is higher than normal traffic.
  • Page 72 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Figure 6-32 Voice VLAN Port window The fields that can be configured are described below: Parameter Description From Port / To Port Select the appropriate port range used for the configuration here.
  • Page 73 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Voice VLAN OUI This window is used to configure the user-defined voice traffic’s OUI. The OUI is used to identify the voice traffic. There are a number of pre-defined OUIs. The user can further define the user-defined OUIs if needed.

  • Page 74: Spanning Tree

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Spanning Tree This Switch supports three versions of the Spanning Tree Protocol: 802.1D-1998 STP, 802.1D-2004 Rapid STP, and 802.1Q- 2005 MSTP. 802.1D-1998 STP will be familiar to most networking professionals. However, since 802.1D-2004 RSTP and 802.1Q-2005 MSTP have been recently introduced to D -Link managed Ethernet switches, a brief introduction to the technology is provided below followed by a description of how to set up 802.1D-1998 STP, 802.1D-2004 RSTP, and 802.1Q-2005 MSTP.
  • Page 75 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch by Ethernet switches. The basic function and much of the terminology is the same as STP. Most of the settings configured for STP are also used for RSTP. This section introduces some new Spanning Tree concepts and illustrates the main differences between the two protocols.

  • Page 76: Stp Global Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch STP Global Settings This window is used to view and configure the STP global settings. To view the following window, click L2 Features > Spanning Tree > STP Global Settings, as shown...

  • Page 77: Stp Port Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Click the Apply button to accept the changes made. The fields that can be configured for BPDU Forward are described below: Parameter Description BPDU Forward Select to enable or disable BPDU forwarding. If enabled, the received STP BPDU will be forwarded to all VLAN member ports in the untagged form.

  • Page 78: Mst Configuration Identification

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch MST Configuration Identification This window is used to view and configure the MST configuration identification settings. These settings will uniquely identify a multiple spanning tree instance set on the Switch. The Switch initially possesses one CIST, or Common Internal Spanning Tree, of which the user may modify the parameters for but cannot change the MSTI ID for, and cannot be deleted.

  • Page 79: Stp Instance

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch STP Instance This window is used to view and configure the STP instance settings. To view the following window, click L2 Features > Spanning Tree > STP Instance, as shown below: Figure 6-38 STP Instance window Click the Edit button to re-configure the specific entry.

  • Page 80: Erps (G.8032)

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch ERPS (G.8032) ERPS This window is used to view and configure Ethernet Ring Protection Switching (ERPS) settings. To view the following window, click L2 Features > ERPS (G.8032) > ERPS, as shown below:...
  • Page 81 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Select the Specify radio button to configure this parameter as per normal. Select the None radio button to revert this parameter to the default setting. Click the Back button to discard the changes made and return to the previous window.

  • Page 82: Erps Profile

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch ERP instance should be identical. Select the Specify radio button to configure this parameter as per normal. Select the None radio button to revert this parameter to the default setting. Profile Name Select the checkbox and enter the G.8032 profile’s name here that...
  • Page 83 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Figure 6-45 ERPS Profile window The fields that can be configured are described below: Parameter Description Profile Name Enter the G.8032 profile’s name here. This name can be up to 32 characters long. Multiple ERP instances can be associated with the same G.8032 profile.

  • Page 84: Loopback Detection

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Loopback Detection The Loopback Detection (LBD) function is used to detect the loop created by a specific port. This feature is used to temporarily shut down a port on the Switch when a CTP (Configuration Testing Protocol) packet has been looped back to the Switch.

  • Page 85: Link Aggregation

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Link Aggregation Understanding Port Trunk Groups Port trunk groups are used to combine a number of ports together to make a single high-bandwidth data pipeline. The Switch supports up to 6 port trunk groups with 1 to 8 ports in each group.
  • Page 86 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The Spanning Tree Protocol will treat a link aggregation group as a single link, on the switch level. On the port level, the STP will use the port parameters calculation of port cost and in determining the state of the link aggregation group.
  • Page 87 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch After clicking the Channel Detail button, the following page will be available. Figure 6-50 Port Channel window Click the Back button to return to the previous window.

  • Page 88: L2 Multicast Control

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch L2 Multicast Control IGMP Snooping Internet Group Management Protocol (IGMP) snooping allows the Switch to recognize IGMP queries and reports sent between network stations or devices and an IGMP host. IGMP Snooping Settings In order to use IGMP Snooping it must first be enabled for the entire Switch under IGMP Global Settings at the top of the window.
  • Page 89 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured for VLAN Querier Status Settings are described below: Parameter Description Enter a VLAN ID from 1 to 4094, and select to enable or disable IGMP snooping querier on the VLAN.

  • Page 90: Mld Snooping

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch MLD Snooping Multicast Listener Discovery (MLD) Snooping is an IPv6 function used similarly to IGMP snooping in IPv4. It is used to discover ports on a VLAN that are requesting multicast data. Instead of flooding all ports on a...
  • Page 91 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch MLD Snooping Settings This window is used to configure the MLD snooping settings. To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Settings, as shown below:...

  • Page 92: Multicast Filtering

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch MLD Snooping Groups Settings This window is used to configure and view the MLD snooping static group, and view MLD snooping group. To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD...

  • Page 93: Lldp

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch LLDP LLDP Global Settings This window is used to configure the LLDP global settings. To view the following window, click L2 Features > LLDP > LLDP Global Settings, as shown below: Figure 6-56 LLDP Global Settings window...

  • Page 94: Quality Of Service (Qos)

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Quality of Service (QoS) 802.1p Priority Port Rate Limiting Port Trust State 802.1p Priority This window is used to view and configure the port’s scheduler method and default CoS settings. To view the following window, click QoS > 802.1p Priority, as shown below: Figure 7-1 802.1p Priority window...

  • Page 95: Port Rate Limiting

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Click the Apply button to accept the changes made. The fields that can be configured in Port Default CoS are described below: Parameter Description From Port / To Port Select the appropriate port range used for the configuration here.

  • Page 96: Port Trust State

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Port Trust State This window is used to view and configure port trust state settings To view the following window, click QoS > Port Trust State, as shown below: Figure 7-3 Port Trust State...

  • Page 97: Security

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Click the Apply button to accept the changes made Security Port Security RADIUS Safeguard Engine Traffic Segmentation Storm Control DoS Attack Prevention Zone Defense Web-based Access Control Port Security Port Security Global Settings This window is used to view and configure the port security global settings.

  • Page 98: Port Security Port Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Port Security Port Settings This window is used to view and configure the port security port settings. To view the following window, click Security > Port Security > Port Security Port Settings, as shown...

  • Page 99: Port Security Address Entries

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Port Security Address Entries This window is used to view, clear and configure the port security address entries. To view the following window, click Security > Port Security > Port Security Address Entries, as...

  • Page 100: Radius

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch RADIUS RADIUS Global Settings This window is used to view and configure the RADIUS global settings. To view the following window, click Security > RADIUS > RADIUS Global Settings, as shown below:...

  • Page 101: Radius Statistic

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured are described below: Parameter Description IP Address Enter the RADIUS server’s IPv4 address here. IPv6 Address Enter the RADIUS server’s IPv6 address here. Authentication Port Enter the authentication port number used here. This value must be between 0 and 65535.

  • Page 102: Safeguard Engine

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Safeguard Engine Periodically, malicious hosts on the network will attack the Switch by utilizing packet flooding (ARP Storm) or other methods. These attacks may increase the switch’s CPU load beyond its capability. To alleviate this problem, the Safeguard Engine function was added to the Switch’s software.

  • Page 103: Traffic Segmentation Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Traffic Segmentation Settings This window is used to view and configure the traffic segmentation settings. When the traffic segmentation forwarding domain is specified, packets received by the port will be restricted in Layer 2 packet forwarding to interfaces within the domain.
  • Page 104 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured for Storm Control Settings are described below: Parameter Description Type Select the type of storm attack that will be controlled here. Options to choose from are Broadcast, Multicast, and Unicast. When the action is configured as the shutdown mode, the unicast refers to both known and unknown unicast packets;...

  • Page 105: Dos Attack Prevention Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch DoS Attack Prevention Settings This window is used to view and configure the Denial-of-Service (DoS) attack prevention settings. The following well-known DoS types which can be detected by most switches: Land Attack: This type of attack involves IP packets where the source and destination address •...

  • Page 106: Zone Defense

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Click the Apply button to accept the changes made. Zone Defense This window is used to view and configure the zone defense settings. To view the following window, click Security > Zone Defense Settings, as shown below:...

  • Page 107: Ssh

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Secure Shell (SSH) is a program allowing secure remote login and secure network services over an insecure network. It allows a secure login to remote host computers, a safe method of executing commands on a remote end node, and will provide secure encrypted and authenticated communication between two non-trusted hosts.

  • Page 108: Ssl

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Secure Sockets Layer (SSL) is a security feature that will provide a secure communication path between a host and client through the use of authentication, digital signatures and encryption. These security functions are implemented through the use of a cipher suite, which is a security string that determines the...

  • Page 109: Ssl Global Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch SSL Global Settings This window is used to view and configure the SSL feature’s global settings. To view the following window, click Security > SSL > Global Settings, as shown below: Figure 8-13 SSL Global Settings window...

  • Page 110: Web-Based Access Control

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Web-based Access Control Web-based Access Control (WAC) is a feature designed to authenticate a user when the user is trying to access the Internet via the Switch. The authentication process uses the HTTP or HTTPS protocol. The Switch enters the authenticating stage when users attempt to browse Web pages (e.g.,...

  • Page 111: Web Authentication

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Web Authentication This window is used to view and configure the Web authentication settings. To view the following window, click Security > Web-based Access Control > Web Authentication, as shown below: Figure 8-14 Port Security Global Settings window...

  • Page 112: Wac Port Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch WAC Port Settings This window is used to view and configure the WAC port settings. To view the following window, click Security > Web-based Access Control > WAC Port Settings, as shown below:...

  • Page 113: Wac Customize Page

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch WAC Customize Page This window is used to view and configure the WAC customized login page. To view the following window, click Security > Web-based Access Control > WAC Customize Page, as...

  • Page 114: Oam

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Cable Diagnostics Cable Diagnostics The cable diagnostics feature is designed primarily for administrators or customer service representatives to verify and test copper cables; it can rapidly determine the quality of the cables and the types of error.

  • Page 115: Ddm Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch This folder contains windows that perform Digital Diagnostic Monitoring (DDM) functions on the Switch. There are windows that allow the user to view the digital diagnostic monitoring status of SFP modules inserting to the Switch and to configure alarm settings, warning settings, temperature threshold settings, voltage threshold settings, bias current threshold settings, Tx power threshold settings, and Rx power threshold settings.

  • Page 116: Ddm Temperature Threshold Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch DDM Temperature Threshold Settings This window is used to configure the DDM Temperature Threshold Settings for specific ports on the Switch. To view the following window, click OAM > DDM > DDM Temperature Threshold Settings, as show...

  • Page 117: Ddm Bias Current Threshold Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured are described below: Parameter Description Port Select the port used for the configuration here. Action Select the action that will be taken here. Options to choose from Add and Delete.

  • Page 118: Ddm Tx Power Threshold Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch DDM TX Power Threshold Settings This window is used to configure the threshold of TX power for specific ports on the Switch. To view the following window, click OAM > DDM > DDM TX Power Threshold Settings, as show below:...

  • Page 119: Ddm Status Table

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured are described below: Parameter Description Port Select the port used for the configuration here. Action Select the action that will be taken here. Options to choose from are Add and Delete.

  • Page 120: Monitoring

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Monitoring Statistics Mirror Settings Statistics Port Counters This window is used to display port counter statistics. To view the following window, click Monitoring > Statistics > Port Counters, as show below: Figure 10-1 Port Counters window...

  • Page 121: Mirror Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Mirror Settings This window is used to view and configure the mirror feature’s settings. The Switch allows users to copy frames transmitted and received on a port and redirect the copies to another port. Attach a monitoring device to the mirroring port, such as a sniffer or an RMON probe, to view details about the packets passing through the first port.

  • Page 122: Green

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Green Power Saving Power Saving This window is used to configure the power saving settings of the Switch. To view the following window, click Green > Power Saving, as shown below: Figure 11-1 Power Saving window...
  • Page 123 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch NOTE: The hibernation feature can only be configured when physical stacking is disabled on this switch. After clicking the Power Saving Shutdown Settings tab, the following page will appear. Figure 11-2 Power Saving Shutdown Settings window...

  • Page 124: Eee

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Energy Efficient Ethernet (EEE) is defined in IEEE 802.3az. It is designed to reduce the energy consumption of a link when no packets are being sent. To view the following window, click Green > EEE, as shown below:...

  • Page 125: Surveillance Mode

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Surveillance Mode Surveillance Overview Port Information IP-Camera Information NVR Information PoE Information PoE Scheduling Management Time Surveillance Settings Surveillance Log Health Diagnostic Toolbar Surveillance Overview In this window, the Surveillance Topology and Device Information are displayed. It appears automatically when you access the Surveillance Mode in the Web UI of the Switch.
  • Page 126 Description This displays the total amount of ONVIF IP cameras connected to the Ethernet ports on the Switch. This displays the total amount of D-Link legacy IP cameras (detected by ASV 1.0) connected to the Ethernet ports on the Switch.
  • Page 127 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch After hovering (with the mouse pointer) over the network device icon, the following additional information will be displayed: Figure 12-3 Additional Device Information After clicking (left-click) the network device icon, the following window will appear.

  • Page 128: Device Information

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch After clicking Ping Test button, the following window will appear. Figure 12-5 PD Alive Configuration window (Ping Result) The Ping Result will be displayed. NOTE: A breakdown of the device icons can be found by clicking the Help menu in the toolbar.

  • Page 129: Port Information

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Port Information This window is used to display port information like distance of the network cable, PoE provisioning status, power consumption, Loopback Detection status, group, and how many IP cameras, NVRs, and other devices are connected to the ports.

  • Page 130: Group Details

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch This displays the Loopback Detection status on the Ethernet port. Normal - Specifies that there are no loops in the network. Loop - Specifies that there is a loop in the network. Click the Loop link to navigate to the Health Diagnostic window.

  • Page 131: Ip-Camera Information

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Guide Click the < Back option to return to the previous window. IP-Camera Information This window is used to display IP camera information. To view the following window, click IP-Camera Information, as shown below:...

  • Page 132: Nvr Information

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch This displays the IP address and MAC address of the IP camera. This displays the description for the IP camera. Click the icon to modify the description Enter the description for the IP camera here.

  • Page 133: Poe Information

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch This displays the description for the NVR. Click the icon to modify the description Enter the description for the NVR here. Click icon to apply the modified description. This displays the group ID of the NVR.

  • Page 134: Poe Scheduling

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch This displays the number of PoE devices connected to the Switch that is using 15 Watts of power per port. This displays the number of PoE devices connected to the Switch that is using 30 Watts of power per port.
  • Page 135 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Parameter Description Range Name Enter the name of the time range schedule here. From: Time (Week/HH) Select the starting day and hour in the time range schedule here. Alternatively, click the icon to open a calendar for easy day and hour selection.

  • Page 136: Time

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Time Clock Settings This window is used to display and configure the time settings on the Switch. To view the following window, click Time > Clock Settings, as shown below: Figure 12-14...

  • Page 137: Surveillance Settings

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured in the SNTP Global Settings section are described below: Parameter Description SNTP State Select to enable or disable the SNTP feature here. Poll Interval Enter the poll interval value here. The range is from 30 to 99999 seconds.
  • Page 138 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured in the Surveillance VLAN Settings section are described below: Parameter Description VLAN ID Enter the ID of the surveillance VLAN here. The range is from 2 to 4094.

  • Page 139: Surveillance Log

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured in the Uplink Port Settings section are described below: Parameter Description From Port / To Port Select the uplink port range that will be used here.

  • Page 140: Health Diagnostic

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Health Diagnostic This window is used to display Health Diagnostics information, Discovered Surveillance Devices information, and initiate a cable distance test on all or selected ports on the Switch. For each link-up port, the system will check the link status, PoE status and error counters periodically.

  • Page 141: Toolbar

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Tx/Rx CRC Counter This field displays the TX/RX CRC counter. Discovered Surveillance Devices This field displays the number of ONVIF IP cameras and NVRs discovered on the port. Click the hyperlink (1) to view the group details associated with IP camera or NVR connected to the port.
  • Page 142 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch HTTP, as shown below: The fields that can be configured are described below: Parameter Description Source File Enter the source filename and path of the firmware file located on the local PC. This field can be up to 64 characters long.
  • Page 143 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP, as shown below: Figure 12-22 Configuration Restore from HTTP window The fields that can be configured are described below:...

  • Page 144: Save

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch To view the following window, click Tools > Reset, as shown below: Figure 12-24 Reset window Select the The Switch will be reset to its factory defaults including IP address, and then will save, reboot option to reset the Switch’s configuration to its factory default settings.

  • Page 145: Help

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Help Click this option to access the built-in Surveillance Help window. Guide After clicking the Help option, the following window will appear. Figure 12-27 Help (Diagram) window Figure 12-28 Help (Table) window...

  • Page 146: Online Help

    Online Help D-Link Support Site Click this option to connect to the D-Link support website. An Internet connection is required. User Guide Click this option to connect to the online user guide for the Switch. An Internet connection is required.

  • Page 147: Appendix A - System Log Entries

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Appendix A - System Log Entries The following table lists all possible entries and their corresponding meanings that will appear in the System Log of this switch. Auto Surveillance VLAN Log Description Severity Event description: When a new surveillance device is detected on an interface.
  • Page 148 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Event description: When an NVR is added in the surveillance VLAN, the log message Informational will be sent. Log Message: ASV: Add NVR (IP:<ipaddr> MAC:< mac-address >) Parameters description: ipaddr: Represent the IP address of the NVR...
  • Page 149 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Log Message: Optical transceiver <interface-id> <component> <high-low> alarm threshold exceeded Parameters description: interface-id: port interface ID. component: DDM threshold type. It can be one of the following types: temperature supply voltage bias current...
  • Page 150 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Event description: Record the event when an interface detect loop. Critical Log Message: <interface-id> LBD loop occurred. Parameters description: interface-id: Interface on which loop is detected. Event description: Record the event when an interface loop recovered Critical Log Message: <interface-id>...
  • Page 151 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Event description: Login through telnet unsuccessfully. Warning Log Message: Login failed through Telnet (Username: <username>, IP: <ipaddr>) Parameters description: username: Represent current login user. ipaddr: Represent client IP address. Event description: Telnet session timed out.
  • Page 152 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Port Security Log Description Severity Event description: Address full on a port. Warning Log Message: MAC address <macaddr> causes port security violation on <interface- id> Parameters description: macaddr: The violation MAC address.
  • Page 153 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Event description: Successful login through Telnet. Informational Log Message: Successful login through Telnet (Username: <username>, IP: <ipaddr>) Parameters description: ipaddr: The IP address of telnet client. username: the user name that used to login telnet server.
  • Page 154 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch vid:VLAN ID Event description: When an interface leaves the voice VLAN and at the same time, Informational no voice device is detected in the aging interval for that interface, the log message will be sent.
  • Page 155 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Web-Authentication Log Description Severity Event description: When a host has passed the authentication. Informational Log Message: Web-Authentication host login success (Username: <string>, IP: <ipaddr | ipv6address>, MAC: <mac-address>, <interface-id>, VID: <vlan-id>) Parameters description: Username: The host username.

  • Page 156: Appendix B - Trap Entries

    DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Appendix B - Trap Entries The following table lists all possible trap log entries and their corresponding meanings that will appear in the switch. Authentication Fail Trap Name Description authenticationFailure An authenticationFailure trap signifies that the 1.3.6.1.6.3.1.1.5...
  • Page 157 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Trap Name Description isLbdLoopOccurred his trap is sent when an interface loop occurs. 1.3.6.1.4.1.171. 11.155.1000.46. Binding objects: (1) isLbdNotifyInfoIfIndex isLbdLoopRestart This trap is sent when an interface loop restarts after 1.3.6.1.4.1.171. the interval time.
  • Page 158 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional...
  • Page 159 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch (3) ifOperStatu Port Security Trap Name Description dPortSecMacAddrViolatio When the port security trap is enabled, new MAC 1.3.6.1.4.1.171. addresses that violate the pre-defined port security 11.155.1000.8.0 1.14.8.0.1 configuration will trigger trap messages to be sent out.
  • Page 160 DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch (5) isnaSessionClientAddress (6) isnaSessionAuthUserName isWebAuthLoggedFail The trap is sent when a host has failed to pass Web- 1.3.6.1.4.1.17.1 Authentication (login failed). 1.155.1000.154. Binding objects: (1) ifIndex (2) isnaSessionAuthVlan (3) isnaSessionClientMacAddress (4) isnaSessionClientAddrType...

  • Page 161: Appendix C - Ietf Radius Attributes Support

    IETF standard RADIUS attributes are defined in the RFC 2865 Remote Authentication Dial-In User Service (RADIUS), RFC 2866 RADIUS Accounting, RFC 2868 RADIUS Attributes for Tunnel Protocol Support, and RFC 2869 RADIUS Extensions. The following table lists the IETF RADIUS attributes supported by the D-Link switch. RADIUS Authentication Attributes: Trap Name...

This manual is also suitable for:

Dis-200g-12psDis-200g-12psw

Table of Contents