D-Link Dis-200G Series Cli Reference Manual page 92

None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the Switch's port connection status.
Example
This example shows how to display the port status
Switch# show interfaces status
Port
------------- ------------- ------------ ------- -------------- -------------
eth1/0/1
eth1/0/2
eth1/0/3
eth1/0/4
eth1/0/5
eth1/0/6
eth1/0/7
eth1/0/8
eth1/0/9
eth1/0/10
eth1/0/11
eth1/0/12
Total Entries: 12
Switch#
16-8 shutdown
This command is used to disable an interface. Use the no form of this command to enable an interface.
Shutdown
no shutdown
Parameters
None.
Default
By default, this option is no shutdown.
Command Mode
Interface Configuration Mode.
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Status VLAN
not-connected 1
not-connected 1
not-connected 1
not-connected 1
connected 1
not-connected 1
not-connected 1
connected 1
not-connected 1
not-connected 1
not-connected 1
not-connected 1
Duplex Speed
auto auto
auto auto
auto auto
auto auto
a-full a-1000
auto auto
auto auto
a-full a-1000
auto auto
auto auto
full 100
auto auto
88
Type
1000BASE-T
1000BASE-T
1000BASE-T
1000BASE-T
1000BASE-T
1000BASE-T
1000BASE-T
1000BASE-T
1000BASE-T
1000BASE-T
None
100BASE-FX