D-Link Dis-200G Series Cli Reference Manual page 55

11-8 profile
This command is used to associate an ERP instance with a G.8032 profile. Use the no form of this command to
remove the association.
profile PROFILE-NAME
no profile PROFILE-NAME
Parameters
PROFILE-NAME
Default
None.
Command Mode
ERP Instance Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
This command is used to associate an ERP instance with a G.8032 profile. Multiple ERP instances can be
associated with the same G.8032 profile.
Example
This example shows how to associate the profile "campus" with instance 1.
Switch# configure terminal
Switch(config)# ethernet ring g8032 ring1
Switch(config-erp)# instance 1
Switch(config-erp-instance)# profile campus
Switch(config-erp-instance)#
11-9 port0
This command is used to specify the first ring port of a physical ring. Use the no form of this command to
remove the settings.
port0 interface INTERFACE-ID
no port0
Parameters
PROFILE-NAME
Default
None.
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Specifies the profile name to be associated with the ERP instance.
Specifies the profile name to be associated with the ERP instance.
51