D-Link Dis-200G Series Cli Reference Manual page 160

Command Default Level
Level: 1.
Usage Guideline
This command displays the RMON alarm table.
Example
This example shows how to displays the RMON alarm table.
Switch# show rmon alarm
Alarm index 23, owned by IT
Monitors OID: 1.3.6.1.2.1.2.2.1.10.1 every 120 second(s)
Taking delta samples, last value was 2500
Rising threshold is 2000, assigned to event 12
Falling threshold is 1100, assigned to event 12
On startup enable rising or falling alarm
Switch#
30-6 show rmon events
This command is used to display the RMON event table.
show rmon events
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the RMON event table.
Example
This example shows how to displays the RMON event table.
Switch# show rmon events
Event 1, owned by manager1
Description is Errors
Event trigger action: log & trap sent to community
manager Last triggered time: 13:12:15, 2014-03-12
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
156