D-Link Dis-200G Series Cli Reference Manual page 203

B0-C5-54-00-00-00 FF-FF-FF-80-00-00 D-Link Device
F0-7D-68-00-00-00 FF-FF-FF-F0-00-00 D-Link Device
Total OUI : 4
Switch#
35-11 show surveillance vlan onvif-ipc interface
This command is used to display ONVIF-based IPC information.
show surveillance vlan onvif-ipc interface [INTERFACE-ID [,|-]] {brief | detail}
Parameters
INTERFACE-ID
,
-
brief
detail
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display brief or detailed ONVIF-based IPC information.
Example
This example shows how to display brief ONVIF-based IP camera information.
Switch# show surveillance vlan onvif-ipc interface Ethernet 1/0/1 brief
Interface
IP Address
MAC Address : 00-01-02-03-04-05
Model
Manufacturer : D-Link
Traffic
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
(Optional) Specifies the port to be displayed.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No space is allowed before and
after the comma.
(Optional) Specifies a range of interfaces. No space is allowed
before and after the hyphen.
Specifies to display brief ONVIF-based IP camera information.
Specifies to display detailed ONVIF-based IP camera information.
: eth1/0/1
: 10.90.90.1
: P3384-VE
: Enabled
199
IP Surveillance Device
IP Surveillance Device