D-Link Dis-200G Series Cli Reference Manual page 154

Switch(config)#
29-3 show radius statistics
This command is used to display RADIUS statistics for accounting and authentication packets.
show radius statistics
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display statistics counters related to servers.
Example
This example shows how to display the server related statistics counters.
Switch#show radius statistics
RADIUS Server: 172.19.192.80: Auth-Port 1645, Acct-Port 1646
State is UP Auth.
Round Trip Time:
Access Requests:
Access Accepts:
Access Rejects:
Access Challenges:
Acct Request:
Acct Response:
Retransmissions:
Malformed Responses:
Bad Authenticators:
Pending Requests:
Timeouts:
Unknown Types:
Packets Dropped:
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Acct.
10 10
4 NA
0 NA
4 NA
0 NA
NA 3
NA 3
0 0
0 0
0 0
0 0
0 0
0 0
0 0
150