D-Link Dis-200G Series Cli Reference Manual page 20

Command Default Level
Level: 1.
Usage Guideline
Use this command to display information about the terminal configuration parameters for the current
terminal line.
Example
This example shows how to display information about the terminal configuration parameter settings for the
current terminal line.
Switch# show terminal
Terminal Settings :
Length : 24 lines
Width : 80 columns
Default length : 24 lines
Default width : 80 columns
Switch#
3-3 show ip http secure-server
This command is used to obtain information about the SSL status. Use this command in EXEC mode or any
configuration mode.
show ip http secure-server
Parameters
None.
Default
By default, the state is disabled.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display information about the SSL status.
Example
This example shows how to display information about the SSL status.
Switch#show ip http secure-server
ip http secure-server state : disable
Switch#
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
16