D-Link Dis-200G Series Cli Reference Manual page 90

rxHCPkt64Octets
rxHCPkt65to127Octets
rxHCPkt128to255Octets
rxHCPkt256to511Octets
rxHCPkt512to1023Octets
rxHCPkt1024to1518Octets
rxHCPkt1519to9216Octets
txHCPkt64Octets
txHCPkt65to127Octets
txHCPkt128to255Octets
txHCPkt256to511Octets
txHCPkt512to1023Octets
txHCPkt1024to1518Octets
txHCPkt1519to9126Octets
rxCRCAlignErrors
rxUndersizedPkts
rxOversizedPkts
rxFragmentPkts
rxJabbers
rxDropPkts
txCollisions
txDropPkts
16-6 show interfaces
This command is used to display the interface information.
show interfaces [INTERFACE-ID [- | ,]] [status]
Parameters
INTERFACE-ID
status
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
(Optional) Specifies that the interface can be a physical port, VLAN
or other.
(Optional) Specifies that display the connection status.
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 138
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
86