D-Link Dis-200G Series Cli Reference Manual page 85

This command is used to display IGMP snooping statistics group information on the Switch.
show ip igmp snooping static-group [GROUP-ADDRESS | vlan VLAN-ID]
Parameters
GROUP-ADDRESS
vlan VLAN-ID
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the IGMP snooping static group information.
Example
This example shows how to display IGMP snooping static group information.
Switch#show ip igmp snooping static-group
VLAN ID Group address
------- --------------- ------------------------
2 225.1.2.32
Total Entries: 1
Switch#
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
(Optional) Specifies the group IP address to be displayed.
(Optional) Specifies the VLAN ID to be displayed.
Interface
eth1/0/1
81