D-Link Dis-200G Series Cli Reference Manual page 59

Command Default Level
Level: 1.
Usage Guideline
This command is used to display information of the ERP instances.
Example
This example shows how to display the detailed information of the ERP instances.
Switch# show ethernet ring g8032 status
Ethernet ring ring1, instance 1
-----------------------------------------
Description:
MEL: 1
R-APS Channel: invalid r-aps vlan,Protected VLAN:
Profile:
Guard timer: 500 milliseconds
Hold-Off timer: 0 milliseconds
WTR timer: 5 minutes
Revertive
Instance State: Deactivated
Admin RPL: -
Operational RPL: -
Port0 State: Forwarding
Port1 State: Forwarding
Admin RPL Port: -
Operational RPL Port: -
Total Entries : 1
Switch#
This example shows how to display the brief information of the ERP instances.
Switch# show ethernet ring g8032 brief
Profile
-------------------------------- --- ----------- -------------------
Total Entries : 1
Switch#
Display Parameters
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Inst Status Port-State
.ID
1 Deactivated p0:-,Forwarding
p1:-,Forwarding
55