D-Link Dis-200G Series Cli Reference Manual page 70

This example shows how to display all the static MAC address table entries.
Switch# show mac-address-table static
VLAN MAC Address
---- ----------------- ---------- -------------------------
1 00-19-11-00-A0-00 Static
4 00-01-00-02-00-04 Static
4 C2-F3-22-0A-12-F4 Static
6 00-01-00-02-00-00 Static
Total Entries : 4
Switch#
This example shows how to display all the MAC address table entries for VLAN 1.
Switch# show mac-address-table vlan 1
VLAN MAC Address
---- ----------------- ---------- -------------------------
1 00-01-00-02-00-04 Dynamic
1 C2-F3-22-0A-12-F4 Dynamic
1 00-01-00-02-00-00 Dynamic
Total Entries : 3
Switch#
13-7 show mac-address-table aging-time
This command is used to display the MAC address table's aging time.
show mac-address-table aging-time
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Type
Type
Ports
CPU
eth1/0/2
port-channel2
eth1/0/1
Ports
eth1/0/2
port-channel2
eth1/0/8
66